Walk-behind rollers are ideal for a variety of confined area dirt and asphalt compaction, in trenches and general asphalt patching and repair.
Walk-behind Roller WBR650
The model WBR650 Walk-behind Roller features a 25.5" drum width and hydrostatic transmission for optimum performance on bridge abutments, larger sidewalks, parking lots and road shoulders. It is ideal for confined area compaction, in trenches and general asphalt patching and repair.
WBR650 Features in Detail
* The WBR650 is powered by a 10 hp Lombardini diesel engine and includes a back-up recoil start.
* It has a compaction force of 2925 lbs. with a maximum travel speed of 2.5 miles per hour.
* The roller has a 10" curb clearance and 1” side clearance on both sides for optimum performance tight to curbs and other obstructions.
* Centrally located eccentrics evenly distribute the compaction forces over the drums.
* A low center of gravity delivers superb stability and maximum maneuverability.
* Both drums drive with a Positraction System for maximum traction on inclines.
* Ergonomically designed controls for speed, direction and vibration are conveniently located and easy for the operator to activate.
* Maximum access for serviceability is provided by easily removed covers.
* The hydraulic and water tanks are also easily removed for cleaning and replacement.
* The top and bottom frames easily separate for added access and convenience.
* Specially designed drain lines can be pulled away from the machine to allow the tanks to be drained easily with little or no mess.
Source : stone-equip.com
Walk-behind Roller WBR650
The model WBR650 Walk-behind Roller features a 25.5" drum width and hydrostatic transmission for optimum performance on bridge abutments, larger sidewalks, parking lots and road shoulders. It is ideal for confined area compaction, in trenches and general asphalt patching and repair.
WBR650 Features in Detail
* The WBR650 is powered by a 10 hp Lombardini diesel engine and includes a back-up recoil start.
* It has a compaction force of 2925 lbs. with a maximum travel speed of 2.5 miles per hour.
* The roller has a 10" curb clearance and 1” side clearance on both sides for optimum performance tight to curbs and other obstructions.
* Centrally located eccentrics evenly distribute the compaction forces over the drums.
* A low center of gravity delivers superb stability and maximum maneuverability.
* Both drums drive with a Positraction System for maximum traction on inclines.
* Ergonomically designed controls for speed, direction and vibration are conveniently located and easy for the operator to activate.
* Maximum access for serviceability is provided by easily removed covers.
* The hydraulic and water tanks are also easily removed for cleaning and replacement.
* The top and bottom frames easily separate for added access and convenience.
* Specially designed drain lines can be pulled away from the machine to allow the tanks to be drained easily with little or no mess.
Source : stone-equip.com
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.