Tuesday, December 29, 2009

Feature of Komatsu's New WA470-6 Wheel Loader


New Large Capacity Torque Converter
Similar to WA480-6, WA470-6 has a newly designed Large Capacity Torque Converter that provides excellent tractive effort, improved acceleration and improved hill climbing ability. The machine has greater productivity in V-cycle applications because of the increased tractive effort. The improved hill climbing ability allows WA470-6 to up-shift gears faster due to the improved acceleration, achieve higher gear ranges and maintain higher ground speeds when working in load-and-carry or hopper feeding applications. In either application, production is increased and fuel consumption maximized resulting in improved fuel efficiency (tons/gal).

Increased fuel efficiency and maximum productivity
WA470-6 is powered by a Komatsu SAA6D125E-5 diesel engine with an Electronic Heavy Duty Common Rail fuel injection system that provides fast throttle response while optimizing fuel combustion. The engine is EPA Tier 3 emission certified without sacrificing power or machine productivity.

Fuel consumption is greatly reduced because of the high-torque engine and the large capacity torque converter, as well as the CLSS (Closed-Center Load Sensing System). With two selectable operating modes that adjust easily, the engine effortlessly adapts to different working conditions. The E mode provides maximum fuel efficiency for general loading and the P mode has a maximum power output for hard digging operation and hill climbing. For load-and-carry or hill-climb operations, the torque converter with optional lock-up transmission provides increased production efficiency, reduced cycle times and optimum fuel savings. An Eco Indicator informs the operator when the machine is maximizing fuel efficiency.

Easy maintenance for a reliable machine
Using strict quality control, Komatsu manufactures all machine parts with an integrated production system to create a reliable machine with very low maintenance costs and easy service access. Equipped with the exclusive Komatsu EMMS (Equipment Management Monitoring System), the operator stays informed of all machine functions on the easy-to-read monitor. An automatic reversible hydraulic radiator fan allows the operator to quickly clean out the cooling system at preset intervals or with the flip of a switch.

New large cab provides excellent operator environment
The wide and spacious cab of WA470-6 can reduce operator fatigue and increase productivity. The wide pillar-less flat glass affords excellent front visibility, and the wiper arm covers a large area for excellent visibility on rainy days. The cab's low-noise design of 72 dB (A) creates a comfortable working environment.

With its built-in ROPS/FOPS structure to protect the operator, the new roomy cab is mounted with Komatsu's unique viscous mounts to keep noise at a minimum and provide a low-vibration, clean operating environment. The layout of the cab has also been improved for easy access to levers, and the air conditioner has been relocated to the front of the cab to increase seat reclining and backward slide adjustment.

Easy Operation
With new Pressure Proportional Control (PPC) control levers, the operator can easily operate the work equipment with fingertip controls, reducing fatigue and improving fine work equipment control and productivity. The work equipment lever console can be adjusted, as can the large arm rest to provide the operator with a variety of comfortable operating positions.

Source : cmec-hb.com

Motor Graders Lay The Foundation Of A Smooth Ride

Building modern roads would be rather difficult without motor graders. One of the reasons we have such good highways is because of the work done by motor graders. They put the finish on the foundations of our roads.

When we drive along a highway, what we see is the finished product. What we don't see is what is sitting below the road's surface. In most cases, bulldozers and loaders work together to cut out a rough road. Motor graders then come in and cut that rough road back to a level and smooth base. If road base or other materials need to be added, it is the grader that levels this out, once again to a smooth surface.

I said that motor graders provide a level surface. This is not quite right. All roads have a slight slope to them. This slope is very precise since it is designed to help cars stay on the road yet encourage water to quickly run off the road. Motor graders use laser technology to get that precise slope in the road's foundation.

Motor grader operators are amongst the elite when it comes to heavy equipment operations. The position is well paid when compared to other operations, the work more precise and hence more challenging, and they are a part of a well oiled team that steadily builds our highways.

Becoming a motor grader operator is not that difficult. Complete a heavy equipment operator training course that includes motor grader skills then hit the workplace to put your new skills into practice. Before you know it, you will be one of the elite operators on a construction team - leading the way to providing us with first class roads to drive on.

Source : cmec-hb.com

New Caterpillar and reg; TH406 and TH407 Telehandlers

"The Cat® TH406 and TH 407 Telehandlers feature a number of new systems and designs to enhance performance, promote operator efficiency and machine productivity, expand versatility and keep service time and costs to a minimum. Both machines have a rated load capacity of 8,100 pounds (3700 kilograms). Each also has a two-section boom, delivering a 20-foot (6.1-meter) lift height on the TH406 and a 24-foot (7.3-meter) lift height on the TH407. The new telehandlers replace the TH220B and the TH330B in the Caterpillar line.

Both telehandlers are powered by the Cat C4.4 diesel engine, which meets U.S. EPA Tier 3 emissions requirements. The turbocharged, aftercooled engine is available in a mechanically controlled configuration, which produces 100 horsepower (74.5 kW), and in an electronically controlled configuration, which produces 125 horsepower (93.1 kW).

The power train also features a limited slip differential fitted in the front axle. The system enables the telehandler to work in difficult underfoot conditions, and it engages automatically so that the operator can focus on getting work done. The powersynchro transmission and unique torque converter drive system ensures long, trouble-free life in tough applications. The advanced cooling system with optional reversing fan delivers excellent performance in all conditions.

The new Cat telehandlers incorporate load sensing hydraulics for superior lifting and digging forces and for the ability to operate all three boom functions simultaneously and proportionally. Smoother, logical control of the boom and work tool enables the operator to do more, more efficiently and more accurately. The new telehandlers also feature Z-bar linkage and greater breakout force for stronger digging performance compared to the previous models.

Designed for operator efficiency and comfort
The TH406 and TH407 feature a new, spacious cab. The operator has superior all-around visibility due to larger window area. Control placement and single electro-hydraulic joystick control of hydraulics ease the burden on the operator. A transmission disconnect button on the joystick allows the operator to route engine power to the boom for faster boom operation.

A new dashboard features an interactive liquid crystal display that shows machine functions such as engine speed, machine speed, selected gear and direction of travel, and fuel level.

The new telehandlers are capable of three different steering modes_two-wheel steer, circle steer and crab steer. Different modes allow for improved control and superior maneuverability in tight spaces. When changing steering modes, the wheels automatically realign to the optimum position.

Versatile and easier to maintain
A wide range of Cat work tools_forks, buckets, grapple tools and lifting equipment_equip the telehandlers for multiple tasks with different types of materials. The Caterpillar manual quick coupler is standard and allows the operator to change work tools quickly. An optional hydraulic quick coupler allows the operator to change work tools quickly and efficiently without leaving the cabin. Couplers provide superior sight lines to the tool.

The TH406 and TH407 offer reduced and simplified maintenance. Routine daily maintenance consists of simply checking the air cleaner indicator, hydraulic filter indicator, fluid levels and engine oil level in conjunction with a walk-around inspection. Service access points are conveniently located under the engine cover.

The TH406 and TH407 are sized to work productively and cost effectively in a variety of construction, materials supply, landscaping, nursery and agricultural applications.

Source : cmec-hb.com

Caterpillar offers articulated truck bare chassis

Caterpillar will offer a family of articulated truck bare chassis to support specialty machines not included in the portfolio of Cat products. Sales of the bare chassis without the dump bed will be targeted toward Caterpillar® Dealers and original equipment manufactures (OEMs) who specialize in such applications as water trucks, high capacity waste, lube & fuel trucks, etc. Cat® Articulated Dump Trucks will continue to be sold through Caterpillar Dealers around the world.
Caterpillar OEM Solutions Group will assume commercial responsibility for articulated truck bare chassis sold as custom machine solutions. This includes standard and long rear frame length configurations. Working with Caterpillar Dealers, OEMs and end-users, OEM Solutions Group can assist with application and integration issues, helping determine the best solutions for mounting a variety of tools and attachments.

The bare chassis product shares very high commonality with Cat Articulated Dump Trucks. Therefore, available Caterpillar information can address many questions related to the bare chassis product.

Service support and financing are available through the worldwide network of Caterpillar Dealers. A variety of genuine Cat parts are also available to make customizing the bare chassis easier, such as hoist cylinders and pivot pins.

Source : cmec-hb.com

Sunday, December 27, 2009

Volvo to equip all general purpose machines with CareTrack telematics system as standard



Volvo Construction Equipment has announced it will fit as standard its remote monitoring (telematics) system on all larger machines – along with a no charge 36 month CareTrack service subscription.

Under the plan, all newly produced larger machines (wheel loaders over 10 tonnes, articulated haulers, excavators over 12 tonnes, motor graders) ordered for markets with CareTrack availability, will be standard equipped with telematics and will be delivered with a no charge, 3-year CareTrack customer subscription that enables owners to enlist the full range of benefits available with remote monitoring.

“Volvo Construction Equipment feels that remote machine monitoring is a feature with high business value for the customer and we want to accelerate its adoption throughout our various market segments.” says Tomas Kuta, President of Customer Support for Volvo Construction Equipment. “Every segment we participate in is being driven toward increasingly sophisticated business approaches by the combined influences of environmental and safety concerns, globalized economies and ever more demanding end customers. Higher adoption levels of telematics and the services that can be delivered using the technology will enable our dealers to more effectively tailor and deliver solutions for our customers.”




CareTrack is Volvo Construction Equipment’s state-of-the-art telematics system used to manage a machine’s productivity and maximize its availability for work. Using GPRS (mobile network) or satellite technology to send information, data is available securely and instantaneously to any remote online connection. Through fault reporting and activity warnings and by facilitating remote diagnosis, the goal is that machine problems will be identified sooner and resolved faster. Machine operation and deployment can be optimized via functions that monitor fuel consumption, location, hours of operation, speed and approaching service intervals. Combined with Volvo's remote self diagnostics (VCADS) and software productivity tools (MATRIS), CareTrack provides the most comprehensive uptime and productivity solution in the industry.

“Through constant machine monitoring, CareTrack can deliver the extra efficiencies that our customers need by ensuring machines are available for work and that they perform that work in the best way possible.” Says Mr. Kuta. “Telematics have come a good distance in a fairly short time. Previously customers have had to make a purchase decision about CareTrack installation and we feel at times the potential benefits available with its use in their particular application has not been clear to them. Further, it was not available on as many machine models as we will now equip. This move is a statement to our customers that telematics are becoming a ‘must have’ for ongoing competitiveness in their business - and we are committed to their success.” says Mr Kuta. “Soon, the value of CareTrack will be as self evident as other industry technologies like GPS grade control – and our customers will be among the first to wonder how they managed without it.”

CareTrack is available on the following machine models
- Wheel Loaders L60F – L350F, excluding L180HL
- Articulated Haulers A25E – A40E
- Wheeled Excavators EW160C – EW230C
- Crawler Excavators EC140CL – EC700CL
- Motor Graders G930 – G990
- Tracked Forestry Carrier FC2421C
- Standard Demolition EC210CLD – EC700CLD
- High Reach Demolition EC360C-HR & EC700B-HR
- Pipelayers PL4608, PL4611

Volvo Construction Equipment

Source : baumpub.com

Truck-mounted AC generators gaining traction with fleets

Chassis-integrated, PTO-driven generators turn trucks into mobile power stations that take serious AC power on the road


30kVA to 180 kVA Real Power components: The Real Power AC generator system consists of a few simple parts that do not interfere with your truck’s existing electrical system. 1.) Dash Switch 2.) ECM 3.) PTO Gear 4.) 30kVA to 180kVA Generator 5.) Power Distribution Panel

Real Power, a manufacturer specializing in the design and integration of patented, truck-mounted, mobile AC power generation systems, announced recent sales growth that it attributes to an increased demand from fleets.

“Fleets are utilizing Real Power technology to bring up to 180 kVA of AC power to remote work sites to operate power-hungry equipment and to bring emergency power to critical-care medical clinics,” said Chris Gray, sales manager for Real Power. “Organizations are seeing new potential for vehicles they are already operating or are considering purchasing.”

Vecoplan, LLC, a worldwide leader in shredding technologies and complete recycling systems, recently chose Real Power generator systems to operate shredding mechanisms on the most powerful mobile document destruction equipment on the market.

“Previously, high-volume document destruction often required transportation of material to an off-site shredder,” said Todd Carswell, Vecoplan’s vice president of technical development. “Moving classified waste is problematic for hospitals, banks, pharmacies and similar businesses that require on-site document destruction. The extraordinary AC power generation achieved with a Real Power system allows us to mount an ultra-high volume shredder on a vehicle that can be driven to virtually any location. Operators can now destroy large quantities of sensitive materials faster and without the liabilities associated with transporting them".



30kVA to 180 kVA Real Power generators: The 30kVA to 180 kVA Real Power generators for class 4 through 8 trucks mount to the outside of the driver’s-side frame rail, out of the way of other truck components. Like the 12kW and 15kW generators, no ground clearance is lost.

Carswell said that Vecoplan’s VST-42e Real Power-equipped shredding trucks are selling well and have virtually revolutionized the mobile shredding market.

The operator of a leading nationwide network of dialysis facilities also recently chose Real Power chassis-integrated generators as part of its plan to keep clinics up and running during power outages and related natural disasters.

“The network’s patients typically need dialysis every two days and delays can be life threatening,” Gray said. “When a recent storm temporarily disrupted Chicago’s power, the network’s leadership explored options for contingency plans that ultimately led to the acquisition of mobile generator trucks outfitted with Real Power technology.”

When a power outage occurs, Real Power-equipped delivery vehicles serving clinics in Chicago and other major metropolitan areas can be immediately deployed. The vehicles and selected clinics have been equipped with a simple-to-use cable interface; the vehicle is parked, cables are connected and a dashboard switch is flipped. Network staff members can perform the hook-up operation themselves and no electrician is needed.

With a diesel fuel capacity of 200 gallons, the trucks can arrive at the site ready to generate power for 48 hours or more without the need for refueling. Unlike traditional auxiliary generator sets that require fuel to be brought to them, the trucks can be driven to the nearest operating fuel station or can be refueled on-site.

30kVA to 180 kVA Real Power interface: Five colour coated cable connections and a sequence control mechanism make hooking up a facility to Real Power simple and easy.

There are plans to outfit more trucks that will serve other parts of the U.S. Clinics will share the cost of the truck that serves them, minimizing their individual expense. When the trucks are not being called upon to generate backup power, they will deliver supplies to network clinics, giving the organization a dual-use advantage.

“Before now, if you needed AC power delivered to a remote location or for an emergency, your choices were very limited,” Gray said. “For smaller power needs, you could haul around a portable generator or tap into an unreliable inverter-based system. And for larger power requirements, you could have a large gen-set delivered to your location.”

Gray noted that organizations with fleets have begun to choose Real Power over large generator sets because Real Power means one truck, one fuel source and maintenance that is as close as the nearest truck service bay.

“Real Power is built for the real world,” Gray said. “It is a field-tested, engineered solution with a proven track record in tough applications: construction, business services, government emergency command centres, municipal and public support services, military, farming, recreation, home use – the list goes on. And, Real Power offers a range of mobile power solutions from 12kW to 180kVA.”

Real Power

Source : baumpub.com

New name, new events at AED Summit 2010

For equipment dealers and manufacturers, every January brings an event that draws them together from across North America and abroad to share information on the latest in the industry. The coming year will bring some big changes, though, as the Associated Equipment Distributors (AED) introduces a new name and new outlook for its annual meeting and trade show.

sSan Antonio, Texas hosts the AED Summit 2010 Convention and CONDEX, an updated version of the annual event that will offer a greater amount of networking opportunities for attendees and manufacturers and more information on the business side of the industry.

Scheduled for January 20 to 22, AED Summit 2010 has been redesigned to meet the demands of AED members, who have asked the organization for a number of changes. Most importantly, they have asked for more networking opportunities with the world's top manufacturers and their fellow members. To meet that goal, AED has reshaped the schedule to bring top executives from OEMs to the party, and is adding more and larger networking events throughout the schedule.

On the CONDEX trade show floor, there will again be a wide range of products on display for attendees to view. Top manufacturers are a part of CONDEX every year, offering a chance for attendees to see the newest equipment on the market. A new feature of the show floor is The Hub - a bar and lounge in the middle of the exhibits that provides a central point for attendees to take a load off and have a coffee or beverage.

Education sessions are planned throughout Summit 2010, with subject matter experts taking to the podium to share business and industry knowledge and tips. Sessions include maintenance programs, sales strategy for the rental industry, inventory management, business strategies and various other topics.

Source : baumpub.com

Friday, December 25, 2009

The 330C Forest Machine Caterpilar



The 330C Forest Machine comes in four configurations: Standard, for delimbing and processing on roads and clearings; High-Wide, for off-road applications and road building; Log Loader with a Caterpillar raised cab; and Log Loader with an auxiliary manufacturer cab. The new model has 12 percent more horsepower than its predecessor, 17 percent more hydraulic flow and 5 percent more swing torque. The 247-net-hp Cat C9 engine features hydraulic-electronic unit injection.

Source : constructionequipment.com

Wednesday, December 23, 2009

FORKLIFT: Facts and Figures Forklift

The forklift is a powered truck fitted with steel forks on its front end, used to lift and transport material. The two parallel steel forks slide beneath the material, often loaded onto a wooden pallet or skid, and then hoisted. Most are fitted with small wheels and are really only practical on finished or paved surfaces. Some forklifts carry their cargo on one side of the vehicle; these are called sideloaders. Though small by comparison to most heavy equipment vehicles, it has become indispensible for the warehousing and manufacturing sectors. Major manufacturers of forklifts (by market share) include Toyota, KION Group, Jungheinrich, NAACO Industries, Inc. (which includes Yale and Hyster brands), Komatsu, Manitou, Mitsubishi, Nissan, Caterpillar, Clark, and Crown Equipment, though many more brands are available among used forklifts. (Over the years, many other brands such as Allis-Chalmers have either gone out of business or been assumed into larger companies through acquisitions.)

Forklifts are organized by class. Forklifts range in size and capability from small, hand powered pallet jacks, designed only to give ground clearance and move the pallet from one area of floor, all the way to diesel-powered driver-operated models of enormous size, used for moving raw logs and capable of loads up to 50 tonnes. Most common are those in the middle, either electric-rechargeable or propane-powered models approximately 6-10 feet (2-3 meters) in length, with forks on a sliding hydraulic mast of cylinders or rails, and capable of loads between one and five tonnes.

Forklift operators must be well trained to operate the machine safely and effectively. Because most models steer from the rear, manouevering quickly can take some getting used to. Additionally, moving with a load held high upon the forks can upset the forklift's low center of gravity, and risk tipping. To keep the forklift balanced, some machines have a counterweight at the back, though in most cases it is the actual engine or battery that acts as the rear weight. Most forklifts have an overhead guard above the cab to protect the operator from falling debris. The exception would be those motorized pallet jacks upon which the operator stands.

Prices for new, mid-sized driver-operated forklifts range from about $20,000 for a 4000-pound lift capacity to $77,000 for a model capable of lifting 8000 lbs.; used forklifts start at around $4000-$5000. However, for projects of limited duration, rentals might be more practical. Rental prices for light duty forklifts range from approximately $1000 to $1500 per week, or $2500 to $3500 per month.

Source : heavyequipment.com

BACKHOE: Facts and Figures Backhoe

A backhoe is a machine designed for excavation. It consists of a scoop or digging bucket on an articulated arm (also known as a stick or dipper); this assembly is typically mounted on the back of a tractor or front loader, enabling the operator to do many different jobs without switching to another piece of heavy equipment. However, the backhoe is not so called because of its rear-mounted scoop; rather, it is called a backhoe because of the way it draws earth back towards itself, rather than pushing it like a bulldozer.

The backhoe arm may also be used to connect to other attachments than a scoop, using an integrated toolcarrier (IT). Such attachments include augurs for drilling, hydraulic hammers for breaking up asphalt, asphalt grinders for milling road, grapples for pulling up roots and stumps, and compactors for compressing loose road material such as gravel. All of these attachments, its compact size, and its manoeuverability on wheels make the backhoe an extremely versatile and popular piece of heavy equipment machinery.

The digging bucket of a backhoe is much narrower than the bucket on the front loader, but is able, because of its articulated arm, to dig much deeper than the front bucket. Its narrow dimensions enable it to dig trenches quickly and effectively for laying pipe or cable, and preparing areas for concrete foundations, and drainage.

The first tractor equipped with a front loader and backhoe was developed in Britain by JCB in 1953. So dominant was JCB in their market that the British still refer to the machines as "JCBs"; the term backhoe is virtually unknown there.

Major manufacturers of backhoes include: Ammann-Yanmar, Case, Caterpillar, Deere & Co., Ford Motor Company, Hitachi, JCB, Komatsu, KPX, Massey Ferguson, Takeuchi, Terex, Terramite, Volvo, and John Allen & Sons.

Because of its popularity - Caterpillar alone reports having sold over 100,000 backhoe loaders since 1985—the laws of supply and demand have kept prices for backhoes very competitive. Used backhoe loaders can run anywhere from $5000 to $30,000, depending on the equipments age, capabilities, and included attachments. Rental prices for large, wheeled backhoe loaders start from around $1400 per week, or $4200 per month.

Source : heavyequipment.com

PIMAKINA CONCRETE BATCHING PLANT


Equipment Description:
Production line of PI MAKINA includes the Crushing- Screening and Washing Plants, Asphalt Plants, Concrete Batching Plants, Concrete Pumps, Truckmixers, Wheel Loaders, Excavators, Graders etc. Furthermore, all the projects utilized for our products are completely our designs. In addition to all these manufacturing varieties, we are producing turn-key power plants & various complex steel structures, Vibrating Rollers, Stacker- Reclaimer, Tower Cranes, Concrete Spreaders, Finishers, overhead cranes and special products as order. And are production number exceeded 10.000 machinery.

Source : everymachinery.com

PUTMEISTER PUMP CAR


Fig. 1571-2
The Putzmeister M 42-5 is an especially compact and flexible truck-mounted concrete pump in the 40-metre class.

In the 40-metre class, Putzmeister will be presenting the M 47-5 and M 42-5 boom models with a roll-Z fold system. With their 5-arm booms, they can adapt particularly flexibly to different conditions on the building site, both for structural and civil engineering. During the machine's development phase, the focus was placed on offering the maximum possible working range, while requiring the minimum support area and providing considerable weight reserves for carrying additional pipes and hoses. The numbers bear witness to an impressive design: on the M 47-5, the width of the supports was able to be reduced to just 8.0 m at the front and 8.9 m at the back (M 42-5: front and back = 7.9 m). If the machine is stably supported on just one side using One Side Support (OSS) system, this figure is reduced again by some 30 %. On either boom model, customers can choose between three large-volume, low-wear pump units, which can achieve delivery rates of up to 160 m³/h. These machines represent the largest truck-mounted concrete pumps on a 4-axle chassis which Putzmeister offer for the European market.

Source : putzmeister.de

Concrete Mixer Truck


This type of trucks developed the advantages of similar competitive types of trucks in China and abroad, adopted advance technology and strict production process. They have reasonable entire vehicle structure, reliable performance, simple operation and artistic contour.

The characteristics of concrete mixer truck:

1.Varieties are abundant
The chassis which the vehicle use include two big series--domestic and imported products.

2.Advanced design method
Adopt AutoCAD, SOLIDWORKS, PRO/E and the finite element analysis software, arrange the refit part reasonably, guarantee the quality and the whole vehicle's reliability.

3.The agitate tank has the advanced structure and reasonable design
The shape of the whole tank is like a pear, it can achieve the maximum space use factor. The agitate leaves have the function of three-dimensional agitation. The advanced design of three-dimensional main and auxiliary leaves guarantee the high material speed, good uniform nature, and low vestiges rate. The three main indicators mentioned above have overpass the national standard.

4.The hydraulic system parts are all from world's famous brand, which include BONFIGLIOLI and PMP from Italy, EATON fromUSA, ZF from Germany and so on. The original installation imported hydraulic parts guarantees the reliable performance

Source : cimcshandong.en.china.cn

Popular Posts

Loading...