Heavy Equipment

How to install the right Genset for Household

2011-03-16T16:56:00.000-07:00

Basically, for a house with a power generator under the 3000 watt home generator installation can be by way of directly connecting the power cord from the generator to stock your home contacts. Look carefully before you use that cable is the right cable stocks are also good contacts. If no cable or stock and contacts have less power will result in heat.

The assembly also you should note that the electrical fuses to be lowered. If you forget, will lead to danger when fired electricity power plants and will collide with the electrical generator. This resulted in an genset will lose and damage the alternator. Warranty does not apply to defects such as these, no matter what brand.

Installation is safe for your generator is to add the ohm switch on your meter. This switch serves to control the building power source does it use electricity from power plants or power from the generator. This switch is obviously safe because there can be no clash between Power Plant and the generator. After the stock added ohm switch box that connects to a generator directly. Cables do not need permanent, can be apart pairs so only if it takes only generator connected to the stock issued and this particular contacts.

Installing a more professional and specialized electrical generator is with a panel of ATS (Automatic Transfer Switch) that automatically transfer power to the generator when there is a failure of supply from the Power Plant. Since the price is high enough not many use it except for an office or medical institution that requires the availability of electricity is for sure.

Tips for buying a New or Used Heavy Equipment

2010-12-10T13:58:00.001-08:00

Buying used equipment can save even more money than buying a NEW us but even so used heavy equipment may still require expenses / repairs that if not careful could spend significant time and cost could even equal the difference in price if we buy heavy equipment new, but now many people who anticipate buying a new machine with low price, namely the heavy equipment from china.

Price of used equipment could be 50% cheaper than new but if the use of heavy equipment is not monitored, then the cost to repair will quickly swell and this obviously is not profitable. Therefore, for users who intend to purchase used equipment more or less technically should know about maintenance and maintenance equipment.

LOAN / LEASING

Because of the high prices for equipment, almost all consumers by way of leasing or buying credits. Many companies buy heavy equipment to the dealers who usually provide a means of finance or leasing. And the dealer is set up an agreement with the Bank or Leasing Company. Generally, companies that want to buy on credit will definitely compare the rates or terms that he got with leasing companies or other banks.

Heavy Equipment For Construction Projects

2010-12-10T13:50:00.000-08:00

Heavy equipment known in the science of Civil Engineering is a tool used to assist humans in doing building a structure. Heavy equipment is an important factor in the project, especially construction projects with a large scale.

The purpose of the use of heavy equipment is to facilitate people in doing his job so that expected results can be achieved more easily in a relatively short time. Heavy equipment commonly used in kostruksi projects include:

- Dozers,

- Digging equipment (excavator) such as backhoe, front shovel, clamshell;

- Transport equipment such as loaders, trucks and conveyor belts;

- The ground like a roller compactors and compactor, and others.

Heavy equipment in construction projects has an important role. Therefore, the understanding of the types of heavy equipment is needed, especially at the planning stage because of heavy equipment must be selected in accordance with project requirements.

Three asphalt compactors from Caterpillar

2010-10-05T18:04:00.000-07:00

Caterpillar's CB54, CB54 XW and CB64 asphalt compactors can be used on all phases of asphalt compaction, reducing the need for a variety of rollers. They work well as a breakdown or intermediate rollers because of their high compactive forces and due to the high pounds per linear inch (PLI) exerted by these machines, they also provide excellent results when working in the finish position. Typical applications include highways, city streets, county roads, lane additions, industrial sites, overlays, airport runways and other production-sized paving jobs.

The CB54, with 1700 mm (67-inch) wide drums, provides a high static force and competes in the 8 to 11.3 metric ton class of asphalt compactors at 10 804 kg (23,818 pounds). The CB54 XW, with 2000 mm (79-inch) wide drums, is designed for wider lane paving and also competes in the 8 to 11.3 metric ton class of asphalt compactors at 11 898 kg (26,230 pounds). The CB64, with 2130 mm (84-inch) wide drums, is designed for wide width paving and provides a maximum weight of 13 740 kg (30,291 pounds).

The new frame design provides a clear view to the drum surfaces and spray bars, allowing the operator to easily monitor water spray performance. The water spray system features a single tank, dual pumps, dual spray bars, and triple filtration that provides redundancy in the system and ensures reliable performance to keep the machine on the mat. Customers will appreciate the dual spray bar performance on polymer-modified mix designs, rubberized asphalt and other mixes that have a tendency to stick to the drums.

Depending on operating conditions, the operator can now choose between single or dual spray bar operation. The CB54 XW and CB64 models are equipped with 18 spray nozzles mounted over each drum, while the CB54 utilizes 14 nozzles.

The five amplitude vibratory system offers a wide range of amplitudes that apply extensive amounts of force for superior performance on thick lifts and tough mix designs. Versa Vibe is a multi-purpose, vibratory system that can handle a variety of mix designs. This system provides two, high amplitude/low frequency settings for tough superpave mix designs, and two, high frequency/low amplitude settings to match higher paving speeds. The dual amplitude/dual frequency vibratory system is similar to Versa Vibe, however the dual amplitude/dual frequency system only utilizes a single amplitude with each frequency. An adjustable auto-vibe function allows the operator to determine when the vibratory system should engage upon starting out or when changing direction.

Source : heg.baumpub

Caterpillar 777F Off-Highway Truck

2010-09-20T18:02:00.001-07:00

Top Performance. Developed specifically for mining, quarry and construction applications, the 777F keeps material moving at high volume to lower cost-per ton. Reliable, Durable, Dependable. Rugged construction and easy maintenance procedures ensure long life with low operating costs.

Operating Specifications

Nominal Payload Class
90.9 tonnes
100 tons
Top Speed - Loaded
64.5 km/h
40.1 mph
Body Capacity - Struck
41.9 m3
54.8 yd3
Body Capacity - SAE 2:1
60.2 m3
78.8 yd3
Maximum Capacity
101.6 tonnes
100 tons
Steer Angle
30.5 Degrees
30.5 Degrees

Engine

Engine Model
Cat® C32 ACERT™
Rated Engine Speed
1750 RPM
1750 RPM
Gross Power - SAE J1995
758 kW
1016 hp
Net Power - SAE J1349
700 kW
938.7 hp
Net Power - Cat
700 kW
938.7 hp
Flywheel Power
700 kW
938.7 hp
Net Power - ISO 9249
700 kW
938.7 hp
Net Power - 80/1269/EEC
700 kW
938.7 hp
Number of Cylinders
12
Bore
145 mm
5.7 in
Stroke
162 mm
6.4 in
Displacement
32.1 L
1959 in3

Weights - Approximate

Target Gross Machine Operating Weight
163293 kg
360000 lb
Operating Weight - Empty
73976.4 kg
163089.85 lb
Chassis Weight
48877 kg
107756 lb
Body Weight
16420 kg
36200 lb

Capacity - Dual Slope - 100% fill factor

Struck
41.9 m3
54.8 yd3
Heaped 2:1 (SAE)
60.2 m3
78.8 yd3

Weight Distributions - Approximate

Front Axle - Empty
45 %
45 %
Front Axle - Loaded
33 %
33 %
Rear Axle - Empty
55 %
55 %
Rear Axle - Loaded
67 %
67 %

Transmission

Forward 1
10.5 km/h
6.5 mph
Forward 2
14.3 km/h
8.9 mph
Forward 3
19.3 km/h
12 mph
Forward 4
26.1 km/h
16.2 mph
Forward 5
35.4 km/h
22 mph
Forward 6
47.6 km/h
29.6 mph
Forward 7
64.5 km/h
40.1 mph
Reverse
12.1 km/h
7.5 mph

Final Drives

Differential Ratio
2.74:1
Planetary Ratio
7.00:1
Total Reduction Ratio
19.16:1

Brakes

Brake Surface - Front
40225 cm2
6235 in2
Brake Surface - Rear
102116 cm2
15828 in2
Brake Standards
ISO 3450: 1996

Service Refill Capacities

Fuel Tank
1136 L
300 gal
Cooling System
232 L
61 gal
Differentials and Final Drives
264 L
70 gal
Steering Tank
30 L
8 gal
Steering System (Includes Tank)
57 L
15 gal
Torque Converter / Brake / Hoist Hydraulic Tank
189 L
50 gal
Torque Converter / Brake / Hoist System (Includes Tank)
504 L
133 gal

Body Hoists

Pump Flow - High Idle
492 L/min
130 gal/min
Relief Valve Setting - Raise
18950 kPa
2750 psi
Relief Valve Setting - Lower
3450 kPa
500 psi
Body Raise Time - High Idle
15 Seconds
15 Seconds
Body Lower Time - Float
13 Seconds
13 Seconds
Body Power Down - High Idle
13 Seconds
13 Seconds

Suspension

Effective Cylinder Stroke - Front
319 mm
12.6 in
Effective Cylinder Stroke - Rear
165 mm
6.5 in
Rear Axle Oscillation
5.4 Degrees
5.4 Degrees

Approximate Weights - Dual Slope

Chassis
48877 kg
107756 lb
Body
16420 kg
36200 lb

Dimensions

Height - Top of ROPS
4715 mm
15.46 ft
Overall Body Length
9830 mm
32.25 ft
Inside Body Length
6580 mm
21.58 ft
Overall Length
10535 mm
34.56 ft
Wheelbase
4560 mm
14.96 ft
Rear Axle to Tail
3062 mm
10.04 ft
Ground Clearance
896 mm
2.93 ft
Dump Clearance
965 mm
3.17 ft
Loading Height - Empty
4380 mm
14.37 ft
Inside Body Depth - Max
1895 mm
6.21 ft
Overall Height - Body Raised
10325 mm
33.87 ft
Operating Width
6494 mm
21.3 ft
Centerline Front Tire Width
4050 mm
13.28 ft
Engine Guard Clearance
864 mm
2.83 ft
Overall Canopy Width
6050 mm
19.84 ft
Outside Body Width
5524 mm
18.12 ft
Inside Body Width
5200 mm
17.06 ft
Front Canopy Height
5170 mm
16.96 ft
Rear Axle Clearance
880 mm
2.88 ft
Centerline Rear Dual Tire Width
3576 mm
11.73 ft
Overall Tire Width
5223 mm
17.13 ft

Tires

Standard Tire
27.00R49 (E4)

ROPS

ROPS / FOPS Standards
.ISO 3471:1994 ISO 3449:1992 Level II

Sound

Sound Standards
.ANSI/J919 APR95 SAE J88 APR95

Steering

Steering Standards
SAE J1511 FEB94 ISO 5010:1992
Steer Angle
30.5 Degrees
30.5 Degrees

Approximate Weights - Dual Slope Lined

Body
22187 kg
48914 lb

Source : cat

NTEA Truck Product Conference, and Business and Market Planning Summit

2010-09-02T16:09:00.000-07:00

August 30, 2010 - NTEA Truck Product Conference

Gain direct access to new model chassis and the engineers who design them at the National Truck Equipment Association’s New Model Truck Product Conference (TPC), scheduled Sept. 13–15, 2010 at the Hyatt Regency Dearborn (Dearborn, MI). This members-only event is the place to see new model year changes firsthand; learn key information on specifications and design; and gain details on critical issues affecting the industry.

Also, NTEA members can take advantage of the opportunity to network with other industry professionals; look under the hood of new models; and learn how chassis manufacturers are resolving challenges.

Participating chassis manufacturers include:

· Ford Commercial Truck

· Freightliner Trucks

· General Motors Fleet and Commercial Operations

· Hino Trucks

· International Truck

· Isuzu Commercial Truck of America, Inc.

· Kenworth Truck Company

· Ram Trucks

· Toyota Motor Sales USA, Inc.

· Western Star Trucks

NTEA members can register for the Truck Product Conference on or before Sept. 3, 2010 to take advantage of early bird conference discounts of $99. After Sept. 3, registration costs increase to $119.

NTEA Business and Market Planning Summit

Leading economists will present critical business planning and economic forecast information affecting the work truck industry at the National Truck Equipment Association’s Business and Market Planning Summit, scheduled Sept. 16, 2010 at the Hyatt Regency Dearborn (Dearborn, MI).

The Summit brings together the nation’s top economists from some of the world’s most respected companies to present industry projections, sales trend insights and economic forecasts on national and regional growth. Attendees will find answers to issues affecting the industry and their firm, and gain valuable strategic planning tools and resources.

Business and Market Planning Summit speakers and topics include:

· North American Macroeconomic Forecast: Mark Vitner, Senior Economist & Director of Corporate Investment Banking, Wachovia Corporation (Charlotte, NC) — Learn the macroeconomic forecasts for the U.S., Canadian and Mexican economies.

· North American Construction Industry Forecast: Charles Yengst, President, Yengst Associates, Inc. (Wilton, CT) — Hear the forecast for the North American construction industry.

· North American Commercial Truck Industry Forecast: Kenneth Kremar, Principal, Industry Forecast Practices Group, Global Insight (Eddystone, PA) — Hear the forecast of North American truck sales for the work truck and trailer industry.

· Truck Equipment Market Outlook, Domestic and International:

Steve Latin-Kasper, Market Data and Research Director, National Truck Equipment Association (Farmington Hills, MI) — Review the truck equipment segment of the industry, including prospects in terms of truck and trailer sales, equipment sales, application markets, leading indicators and foreign trade.

Register for the Business and Market Planning Summit by Sept. 3, 2010

to take advantage of early bird conference discounts of $249 members and $299 nonmembers. After Sept. 3, registration costs increase to $299 members and $349 nonmembers.

For more information or to register for these events, visit www.ntea.com or call 1-800-441-NTEA (6832).

Source : heg.baumpub

CW Enterprises changes the function of Pull Grader

2010-08-13T05:17:00.000-07:00

CW Enterprises offers a grading option for large construction sites and road building. The Pull Grader is built from older motor graders. The old graders get stripped down, rebuilt, and reworked into a pull type design. The Pull Grader was originally designed for agricultural use, including drainage and levelling. The weight of the unit and its ability to penetrate the soil in tough conditions also make it very useful on the construction site. The Pull Grader can be pulled with virtually any power unit however 250-hp to 400-hp 4WD Ag tractors seem to be the best fit.
There are some definite advantages to the pull type design. With the added length of the grader they do an excellent job of levelling and also work well in soft and wet soil. Another reason they work so well is there is a lot more horsepower and traction for pulling the grader through tough spots where a motor grader would spin out. The company says you can move the same amount of dirt with a 25,000-pound Pull Grader as you would a 40,000-pound motor grader. CW Enterprises also custom conversions as well. The standard pull grader is 34 feet long, weighs 22,000 to 25,000 pounds, has a 14-foot moldboard, 14 x 24 rear tires, and requires four hydraulic remotes.

Source : heg.baumpub

New Holland introduced pallet forks specially designed for use with its skid steers and compact track loaders

2010-08-05T03:15:00.000-07:00

New Holland Construction introduced pallet forks specially designed for use with its skid steers and compact track loaders. The forks are particularly useful in material handling, construction, agriculture, landscaping and utility applications.

Marketing Manager of New Holland Construction Dave December said When it comes to transporting and loading materials, pallet forks are one of the most widely-used attachments for skid steers and compact track loaders. The new pallet forks feature a rugged frame and outstanding visibility to the tines for easy and accurate loading. The pallet fork assemblies are available with either 48- or 42-inch tines, with a choice of 5,500 or 4,000 pound-rated tine sets. The frame's mounting angle ensures optimum forward tilt for load pick-up and excellent rollback for transporting loads. The design offers ample room between the frame and the cab, providing the operator with easy access to and from the cab.

New Holland skid steers and compact track loaders feature outstanding forward reach and dump height, superior visibility, more lift capacity and better stability. These machines pack big performance and operator comfort into compact frame sizes so operators can work efficiently in tight, narrow and confined spaces. For additional skid steer and compact track loader product and attachment specifications, competitive comparisons, finance offers and more, please visit www.newholland.com. For a New Holland product demonstration, see your local New Holland dealer.

Source : heg.baumpub

Heavy Equipment Operating Engineer

2010-07-07T16:32:00.000-07:00

Whether working as heavy equipment operators, mechanics, or surveyors, operating engineers can be found on any project using construction equipment. "Heavy equipment" is the blanket term for numerous types of machines: cranes, bulldozers, front end loaders, rollers, backhoes, graders, dredges, hoists, drills, pumps and compressors are just some of the equipment used by operating engineers. We are also called hoisting and portable engineers because the equipment we operate lifts and/or moves.

In most cases, if it can push, pull, pump or lift material, rolls on tires or crawls on tracks like a tank, it’s the work of IUOE. On virtually all construction projects, operating engineers are the first workers on the job and the last to leave. Our work is essential to a smooth-running construction project.

Although many members have a favorite type of machine to operate, operating engineers are masters of a variety of equipment. This versatility keeps us employable because employers' needs vary from project to project.

Heavy equipment mechanics and surveyors also are very important contributors on any construction job. Mechanics repair and maintain the equipment used on the job, requiring a thorough knowledge of many types of equipment. Skilled mechanics are critical because if the equipment isn't running when needed, an entire project can come to a screeching halt.

Surveyors use expertise in linear and angular measurements to lay out the geographical boundaries of a construction project. A surveyor must have a good command of advanced math principles because this type of work is extremely precise.

Source : iuoe.org

Heavy Equipment career starting with Heavy equipment training school

2010-07-07T16:29:00.000-07:00

When talking to those who dream of a heavy equipment career, it can be hard work trying to get them to think realistically. As with most careers, you can’t expect to start at the top - after all, if you start at the top, the only direction you can go is down. Operating a large excavator or bulldozer is not out of the question, but you do have to get the basics right first and to then work your way to more responsible roles.

If you are considering a career in heavy equipment, start by thinking like an employer - who are you going to employ and what sort of jobs are you going to give them? Novices are obviously going to get the more mundane easy jobs. The harder task will go to those that have experience. Just remember, those experienced operators once started at the bottom, as you will. How they applied themselves to the various tasks then reflected in the types of jobs they were asked to do - the more they applied themselves and learned about their roles, the more difficult the tasks.

So starting with the basics then becomes important. Heavy equipment training that exposes students to a range of equipment and a range of tasks is the best start. Hands on training is obviously the best way to learn. Standing behind someone and watching them may teach you how to use the controls, but it doesn’t give you a ‘feel’ for the equipment. There is so much more to learn by actually sitting in the operator’s seat. Your hands and feet play an important role in ‘feeling’ what the equipment is doing - for example, is it straining, is it hitting rock, and what about the many other situations?

This is what is often termed ‘instinctive’ control of your equipment. Your body feels what is happening and acts almost before your brain clicks into gear. The more hands on experience you gain, the more control you will have over your equipment. ATS Heavy Equipment Operator Schools have been training prospective heavy equipment operators for decades. We can’t teach you ‘instinct’ - you develop that over time. We can, however, teach you to become highly proficient operators, ready to start in the work place and ready to gain that ‘instinct’ in the workplace. Your heavy equipment career starts by getting those basic skills right - and that’s where we can help you.

Source : heavyequipmentschool

Improved ride-on trowels

2010-06-06T21:48:00.000-07:00

Wacker’s expanded CRT 48 ride-on trowel series offers improved steering and additional engine options. Three new models offer a patent-pending torsion assist steering system that makes Wacker’s 48-inch ride-on trowels easy to control. By reducing the amount of force needed to control the unit, Wacker’s CRT 48 series models offer easy steering and operation as well as reduced operator fatigue. Three engine options are now available on the 48-inch CRT series. The CRT 48-34V comes with a premium 34-hp liquid-cooled Vanguard engine. The CRT 48-35V is offered with a 35-hp air-cooled Vanguard engine, and the CRT 48-35L is equipped with a 4-cylinder, 35-hp liquid-cooled diesel engine.

Source : heg.baumpub

Wacker Neuson line expanded with two new generators

2010-06-06T21:43:00.000-07:00

Wacker Neuson is expanding its mobile generator line upwards, adding 180 kVA (prime) and 240 kVA (prime) sizes. These generators feature the same design philosophy Wacker Neuson has incorporated in its smaller mobile generators: compact, robust construction, lowest in class sound emissions, superior motor starting, user friendly operation and service, and a broad range of factory installed options. In addition to new clean burning Tier III engines, standard features such as 115 percent fluid containment, crankcase oil vapour recovery system, and no mess oil and radiator drain hoses make these new Wacker Neuson models environmentally friendly. Wacker Neuson engineers designed these generators from the ground up, mating the new John Deere Tier III engines to properly sized, high efficiency Mecc Alte alternators to ensure that full engine potential is achieved for maximize power output and fuel efficiency. Both models come standard with integrated, long run fuel tanks that are 115 percent fluid contained; at 100 percent prime kW output, the G 180’s 300-gallon fuel tank provides 28 hours of run time while the G 240’s 400-gallon tank provides 30 hours of run time.

Source : heg.baumpub

Compact wheel loaders

2010-06-06T21:40:00.000-07:00

Wacker Neuson’s new line of six compact wheel loaders includes four articulated units and two all-wheel-steer models.

According to Jay Baudhuin, compact class product manager, “The new Wacker Neuson compact wheel loaders can perform the same tasks as a higher powered skid loader but deliver up to 30 percent in fuel savings.” The three-metric-ton member of the line is the WL 30 compact wheel loader (shown here) with a straight load capacity of 4,437 pounds and a fully articulated tipping capacity of 3,647 pounds when using a standard 0.59-cubic-yard bucket. It is powered by a 4-cylinder, 48 horsepower Perkins diesel. As with all four of their compact, articulated wheel loaders, the new WL30 features a side-tilting operator’s platform that provides easy access to the engine and other components.

Source : heg.baumpub

Komatsu Adds PC138USLC-2 to its Fleet of Near Zero Tail Swing Excavators

2010-06-06T15:51:00.000-07:00

For increased power and performance in large quarry and heavy construction applications, Komatsu America Corporation (KAC) introduces the 651 hp, 251,000-lb PC1250-7 hydraulic excavator. The PC1250LC-7 replaces the company's P1100LC-6 as its flagship excavator for the construction market.

The PC1250s powerful Komatsu SAA6D170E-3 engine increases hourly
production by up to seven percent over the PC1100LC-6. The engine features an electronic controller and governor that fully complies with EPA Tier II air quality regulations. The PC1250LC-7 incorporates Komatsu's patented OLSS open-center, load-sensing and engine speed-sensing hydraulic system with four variable capacity pumps designed to enhance the machine's speed and
flexibility.

Two working modes, plus a heavy lift circuit allow the operator to match machine speed and power to the job. A unique two-mode boom setting allows the operator to electrically select a smooth mode for fine work and a power mode for heavy-duty applications.

Built to be a Low Cost Producer

New engine oil and filter change intervals are extended to 500-hours from the 250-hour interval recommended on the PC1100LC-6. The replacement interval for the hydraulic oil has been extended to 5,000 hours. In addition, the backhoe is equipped with a new wiring harness, DT type connectors and heat proof covering. These new features increase the reliability and durability of the
machine while reducing owning and operating costs.

The PC1250-7 is designed to reduce operating costs by extending
component life cycles. New hydraulic piping offers heat proof O-rings and face seal joints for added durability. The boom and arm offer increased section size and plate thickness, as well as continuous two-sided groove welding for maximum strength and reliability in rugged digging conditions.

The new Equipment Management Monitoring System (EMMS), accessed
through the color monitor panel in the cab, has the capability to schedule required maintenance and perform onboard diagnostics. Machine abnormalities are maintained in an electronic memory.

An optional Vehicle Health Monitoring System (VHMS) provides self-contained diagnostics, a preventive maintenance scheduler, gauge panels with operator warning override and downloadable machine performance history. Reduced costs and troubleshooting time, increased machine availability and reliability, as well as extended component life are the direct results of the VHMS monitoring system.

The PC1250-7 has fewer welds in the lower X frames and features
increased plate thickness for years of trouble free operation.

Automatic track tensioning and heavy guarding for the dual travel motors that power each track are standard on the PC1250LC-7. Travel motors are enclosed within the width of the track shoes for even further protection.

Operator Comfort Features

The PC1250-7's new, spacious operator's cab provides a comfortable work environment designed to maintain high operator productivity. The pressurized cab reduces noise levels 4 db(A) lower than the PC1100LC-6 and keeps dust and other particles from the cab's interior. The viscous damping mount system helps to minimize noise, shock and vibration in rough working
conditions. The inclined dashboard, one-piece-right-hand window, and spacious ceiling hatch increase visibility to all sides of the cab. The cab also is equipped with multi-adjustable seat and large-capacity, electronically controlled AC/heater/defroster systems to sustain operator comfort in any weather.

Versatility Is Key

Komatsu will offer the PC1250-7 in five different arrangements. The regular PC1250-7 features the standard length 21'1" track frame and 29'10" G.P. boom, and three different arm lengths. This configuration meets many general excavating requirements. Next, the PC1250-7 is configured with the 24'3" track frame and the 29'10" G.P. boom. This arrangement is perfect where additional flotation or maximum craning ability is required. The PC 1250-7 is further built with a standard length 21'1 track frame, a 25'7" reinforced boom and a reinforced 11'2" arm.

Top loading off road dump trucks is the specialty of the PC1250SP-7. The SP (super production) has a standard length 21'1" track frame machine, a 25'7" reinforced boom and a reinforced 11'2" arm.

The PC1250-7 can also be configured as a material handler with options such as 55 through 70-foot material handling fronts, clamshells, grapples, magnets and cab risers. Whatever the application, the PC120-7 MH can be a highly efficient loading and unloading tool.

Finally, the PC1250-7 can be purchased as a loading shovel. Featuring the standard length 21'1" track frame, 18'6" boom and 13'5" stick, the PC1250-7 loading shovel is a highly refined performer in truck loading applications where it is necessary for the loading tool to set on the same level as the dump truck.

Source : heavymachineryinfo

New 302.5C Mini Hydraulic Excavator Features Increased Performance, Operator Comfort and Serviceability

2010-06-06T15:50:00.000-07:00

The Caterpillar® 302.5C Mini Hydraulic Excavator features more power, greater digging forces, a more comfortable operator station and easier access for service than its predecessor, the 302.5. The new C-Series model features 10 percent more bucket digging force and 10 percent more stick digging force than the previous model.

The new mini excavator gets more work done faster through an engine power increase of about 8 percent-to 18.6 horsepower (13.9 kW). The engine meets US EPA Tier 2 and EU Stage II emissions standards. The 302.5C retains the variable displacement hydraulic pump, which eliminates stalling and enables the excavator to dig through the toughest conditions. Operating weight of the excavator is 6,283 pounds (2850 kg) when equipped with a cab and 6,052 pounds (2745 kg) with a canopy.

The C-Series Mini Excavator cab is large and spacious for an expansive viewing area and good air circulation. When compared to the previous model, the uncluttered, flat floor is larger and the door is wider. For ventilation the cab has a retractable front window that can be stowed easily in the roof space with a gas strut assisted linkage. Air conditioning is available on the 302.5C. A suspension seat, console-mounted implement controls and adjustable wrist supports help reduce operator fatigue. Pilot hydraulic implement controls are low effort. Switches incorporated in the joysticks provide easy control of boom swing and auxiliary hydraulic functions.

The two-speed travel system is controlled by a switch on the dozer lever, which makes speed changes easier while dozing. The dozer float function makes grading tasks easier. The machine monitoring system is mounted near the operator's line of sight to ensure that gauges and warning lights can be seen easily. The operator station includes a mobile phone holder and 12-volt power source.

For lower owning and operating costs, the new machine features high strength side panels, polyurethane paint finish and a large swing-out rear door for service access. A lifting side panel provides access to the hydraulic tanks and main implement valve. The 500-hour oil and filter change interval helps keep operating costs down.

The front linkage is a fabricated box section, built for performance and long life. The independent swing boom enables the machine to work next to a wall or obstruction. The 200-degree bucket rotation ensures good material retention at height as well as flat trenching capability. A choice of stick lengths and a wide range of Cat® Work Tools add versatility to the 302.5C.

Source : heavymachineryinfo

Hydraulic hammers deliver maximum force

2010-05-15T14:11:00.000-07:00

Volvo Construction Equipment

The Volvo HB1400 hydraulic hammer for the EC210CL crawler excavator can break concrete with an impact force of 2,500 pounds per foot. The Volvo HB2400 hydraulic hammer is designed for Volvo EC240CL and larger excavators and can break concrete and bedrock with a maximum impact of 6,000 pounds per foot.
The long, heavy piston matches the diameter and weight of the work tools for maximum transfer of energy from the hammer to the ground material. An integrally top-mounted accumulator guards against pressure peaks and helps the piston keep consistent power. And the pressure-control valve keeps the hammer striking at full force, even if hydraulic pressure from the excavator changes.

Source : heg.baumpub

John Deere Series II ADTs with exclusive onboard weighing system

2010-05-15T13:49:00.000-07:00

The four new John Deere Series II Articulated Dump Trucks (ADTs) are rugged six-wheel-drive units that provide powerful traction in demanding conditions. They are designed for maximum productivity, increased uptime and low daily operating costs, particularly in fuel efficiency, with Tier 3-certified engines ranging from 265 to 413 hp.

Onboard weighing systems are standard equipment on these trucks. They give operators overload protection, with mirror-mounted lights that alert the loading operator when the truck is nearing capacity. The payload weight information is also available through JDLink so owners and equipment managers can monitor truck utilization far away from the jobsite.

A fully automatic transmission with an integrated transmission retarder has improved transmission shift performance, allowing quicker acceleration out of the loading area for faster cycle times, along with decreased fuel consumption.
“Because John Deere ADTs already have a significant weight advantage and the lowest ground pressure among the top five ADT manufacturers, Deere trucks burn less fuel, particularly in high time-on-grade applications and poor underfoot conditions,” said John Chesterman, product marketing manager for ADTs, John Deere Construction & Forestry.

The tire pressure monitoring system lets the operator keep track of tire pressure from the seat, eliminating guesswork and time out of the cab. The owner can also monitor tire pressures from his desktop since all of the tire information is available via JDLink.
John Deere D-Series II ADT cabs have been updated with a modern, comfortable and convenient design, with lower sound levels and a premium, heated air suspension seat standard. The Series II ADTs feature push-button start and stop with a standard turbo cool-down timer. To help owners reduce costs, these trucks have programmable auto-shutdown timers to save fuel, reduce noise and minimize engine use at times when the trucks are not doing productive work.

Taking fleet management even further, Series II ADTs come with JDLink Ultimate as standard equipment.
An updated 25-button sealed switch module with integrated transmission and dump body controls makes the units easier to operate and ensures switch durability.

All John Deere ADTs feature fabricated, heavy-duty frames, axle housings and articulation joints for lower truck weights and reliable performance. The ribbed body design increases strength yet contributes to low ground pressure. The structure is also engineered to ensure a best-in-class frontal approach angle. Deere ADTs also have ground level fueling.
The 250D and 350D have dry disc brakes and axles with limited slip differentials, while the 350D and 400D have controlled traction differentials and wet disc brakes standard.
“Building and site prep contractors, quarries, and road builders are going to find Series II ADTs have the fuel efficiency, productivity, durability and reliability to keep them more productive at a lower cost per ton,” said Chesterman.

Source : heg.baumpub

Concrete paving advances: paving mold and bar inserter

2010-05-13T04:21:00.000-07:00

The new GOMACO 5400 series paving mold – introduced at the recent World of Concrete – was designed with a structural integrity that is unmatched in the industry, the company says. It features a new “box” design, 54-inch (1372mm) finishing length and a 0.5-inch (13mm) paving skin. The new paving system has a series of accessories including centre and sidebar insertion systems. It features a spreader plow, independent of the mold, or an optional auger to spread the concrete across the paving width. A newly designed strike-off is now mounted to the paver’s main frame, independent of the mold. The strike-off has a wedge-lock system for easy width changes and hydraulic height and crown adjustment. The new mold also features hydraulic Vertically Hinged Sideplates (VHS), self-contained to the inside of the mold, allowing minimum track clearance.

GOMACO’s IDBI attachment is now available on all new GOMACO pavers. The IDBI attachment is an independent unit providing dowel bar insertion behind a paver to form the transverse joint. No power or hydraulics is needed from the paver’s engine. A CAN cable connects the IDBI’s controls to the controller on the paver and allows the two systems to communicate. The new design features a new IDBI tray that is stronger, more compact and makes width changes easier. New adjustable-height bar extractors allow contractors to quickly and easily change the setup for different bar sizes for insertion requirements. Its new GOMACO G+ control system features the same graphical display as the G22 controller, with easy to learn and easy to understand controls. The IDBI information is presented in full colour, commands are presented in full text, and it is able to operate in multiple languages, by customer’s choice. The IDBI attachment has outriggers to aid in attaching the unit to the paver and also for loading and unloading the unit for transporting. The outriggers can be hydraulically lowered and placed on the ground to support the full weight of the IDBI as it is attached to or detached from the paver.

Source : heg.baumpub

The difference between Gas and Diesel Tractor

2010-05-03T19:10:00.000-07:00

Diesel compact tractor is superior to a gasoline garden tractor.

The First, diesel engine doesn't have the parts that normally wear out or give problems. There are no spark plugs, rotors, points, or distributor caps like the garden tractor. There is no carburetor either, that will gum up and be hard to start after being stored for a long period of time. Diesel engines can be stored for long periods of time and still start right up.

Secondly, diesel engines in most tractors are water cooled. This will allow the engine to run at a more consistent and cooler temperature, which will extend the life of the engine. The typical properly maintained diesel engine can run thousands of hours without breaking a sweat - and without having to be rebuilt.

Diesel engines will also make more power. Even though gasoline tractors may be a little quicker to start with, they can't begin to match the power and raw torque that diesel engines offer. Another reason why diesel tractors are better than gas is the available attachments.

Most gasoline tractors are equipped with a belly mower and don't normally have a three point hitch. This will severely limit the type of implements that you can use and also limit the tractors expandability.

Most blades and scoop implements won't work with a gasoline tractor. The drive train will also limit the type of implement you can use with a garden tractor.

The typical gasoline garden tractor is belt driven, while a belt drive won't pull as much load as a diesel powered tractor. You would probably not be able to use a box blade or tiller either with the average gasoline powered tractor.

Source : buildingconstructionequipment

Compact all-wheel-steer wheel loader

2010-04-23T13:49:00.000-07:00

Wacker Neuson has expanded its compact equipment line with a new all-wheel-steer wheel loader that delivers excellent maneuverability and stability. The 1150 wheel loader features a 4-wheel steer system and rigid frame design and is the largest of the Wacker Neuson wheel loader line.
“The new 1150 is powered by a turbo-charged Deutz engine (77.8 hp) and has an exceptional power to weight ratio making this unit very fuel efficient and economical to run,” says Jay Baudhuin, compact equipment product manager for Wacker Neuson Corporation.

The 5.9-metric-ton model offers 9,127 pounds of tipping capacity even at full turn with a 1.5-cubic-yard standard bucket. “This machine offers superior break-out force,” adds Baudhuin. “It has the power and capacity to do the heavy lifting without sacrificing maneuverability and stability.”
The 1150 is user-friendly with a spacious operator station that allows for excellent 360-degree visibility and ergonomics. A single joystick operation allows for precise work with minimum effort and reduced fatigue. The hydraulically operated quick-hitch allows for efficient changing from one attachment to another without leaving the operator’s station.
Wacker Neuson’s new 1150 complements the already introduced 280 and 850 all wheel steer models as well as the four articulated models. “Now with seven models to choose from with a variety of power and performance ratings, Wacker Neuson wheel loaders are an economical alternative to skid steer loaders as they can perform the same tasks, faster and more smoothly on the job,” says Baudhuin.

Source : heg.baumpub

On/off highway excavators have greater capacity

2010-04-23T13:46:00.001-07:00

Gradall Industries, Inc

The new XL 5300 III excavator is the largest model in the Gradall excavator family of on/off highway machines – with greater capacity as well as the ability to work efficiently in any direction.
It has an operating weight of 51,216 pounds (23,231 kg) with a maximum lift capacity of 13,508 pounds (6,217 kg). Rated boom force is an impressive 24,941 pounds (111 kN) while bucket breakout force is rated at 25,405 pounds (113 kN).
New operators can become more comfortable with this model faster thanks to a switch in the cab which provides a choice of SAE, Deere or Gradall joystick control patterns.
A standard “bucket shake” mode, controlled with a joystick button, allows operators to more evenly distribute fill dirt and rip-rap.
A single Detroit Diesel Mercedes engine delivers 173 horsepower to the upperstructure as well as the carrier. The chassis features the new Series III counterweight design that creates a shorter tail swing – a big plus when working in tight quarters or along highways. But even with a compact counterweight design, the machine has excellent working boom reach to 33 feet, 10 inches (10.3 m) and digging depth of 24 feet, 7 inches (7.5 m).

Source : heg.baumpub

Caterpillar 529 Trailer Mount Knuckleboom Loader

2010-04-05T16:10:00.000-07:00

The Caterpillar Loader is built using advanced design technology, for the strength and reliability needed to meet the demands of high production delimbing and loading. Features such as smooth and responsive joystick controls, quiet comfortable operator stations and powerful Cat engines provide the performance you've grown to expect from Caterpillar machines.

Specifications

Units: US | Metric

Engine
Gross Power
116.3 kW
156 hp

Engine RPM - Full Load Governed
2200 RPM
2200 RPM

Engine Model
Cat® C6.6 ACERT™

Operating Specifications
Knuckleboom Length
8.8 m
29 ft

Swing Bearing Diameter
1092.2 mm
43 in

Swing Bearing Gearing
External

Source : cat

Caterpillar 519 Trailer Mount Knuckleboom Loader

2010-04-05T16:03:00.000-07:00

The Caterpillar Loader is built using advanced design technology, for the strength and reliability needed to meet the demands of high production delimbing and loading. Features such as smooth and responsive joystick controls, quiet comfortable operator stations and powerful Cat engines provide the performance you've grown to expect from Caterpillar machines.

Specifications

Units: US | Metric

Engine
Gross Power
116.3 kW
156 hp

Engine RPM - Full Load Governed
2200 RPM
2200 RPM

Engine Model
Cat® C6.6 ACERT™

Operating Specifications
Knuckleboom Length
8.2 m
27 ft

Swing Bearing Diameter
1092.2 mm
43 in

Swing Bearing Gearing
External

Source : cat

Recycle systems enhance cost efficiency

2010-04-05T15:56:00.000-07:00

Asphalt Drum Mixers, Inc.

Asphalt Drum Mixers offers four models of portable and stationary recycle systems allow plants to use milled material in hot mix asphalt (HMA). Since recycled asphalt pavement (RAP) is much cheaper than virgin aggregate, the result is a less expensive finished product that maintains the high quality of a pure virgin aggregate mix. Based on conditions and type of plant, up to 50 percent of the HMA can contain recycled pavement.
ADM’s recycle bins feature a 15-ton capacity. A tapered discharge opening leads to the direct-drive belt feeder which has a five-horsepower motor, multi-ply belt, self-cleaning tail pulley and adjustable skirt boards.
To transfer RAP from the bin, the recycle system includes a heavy-duty weigh conveyor that features a channel frame and wind protection for accurate weighing. The conveyor is two-feet wide and, depending on the model, between 45- and 65-feet long. It introduces RAP to the dried aggregate mix after the heating process.
An optional lump breaker is available to break down large pieces of RAP into a useable size. Single- and double-deck scalping screens are also available to ensure oversized material does not enter the aggregate mix. Other options include air cannons, grizzlies, bin extensions, adjustable legs with sand shoes, and a skid with bolt-on support legs.

Source : heg.baumpub

Uniquely-designed lift arm on articulated loaders

2010-04-05T15:53:00.000-07:00

Gehl Company

Gehl’s new compact articulated loader models – 140, 340 and 540 – feature tipping loads ranging from 1,900 to more than 5,100 pounds (when not articulated) and rated operating capacities from 950 to more than 2,550 pounds. Engines range from 23 hp on the 140 model to 47 hp on the 540. They can use most universal-type attachments, putting tools customers already own to good use.

A heavy-duty oscillating joint offers 45-degree turning angles to the left and right and 10 degrees of oscillation in both directions. The bucket and tires follow a constant turn radius, so the rear tires of the loader follow the path of the front tires. Narrow machine widths, as narrow as 41 inches on the model 140, allow access to tight, confined spaces that most skid-steer loaders with comparable operating capacities cannot access.

Lift arm and bucket float features allow for “floating” of the lift arm and bucket for light scraping and rearward leveling actions.
The uniquely-designed lift arm on the Gehl articulated loaders is designed to achieve maximum strength, excellent visibility and fast cycle times. The parallel-type linkage on the models 140 and 340, and “Z” bar-type linkage on the model 540 provide excellent bucket breakout forces from 2,433 lbf. on the model 140 to 10,749 lbf. on the model 540. The unique linkage design allows for mechanical self-leveling action in both the up and down directions, excellent bucket dump angles at the mid- and top-ranges of the lift path, as well as outstanding forward reach.

Source : heg.baumpub

Massive investment by JCB results in industry’s cleanest engine

2010-04-05T15:50:00.000-07:00

March 26, 2010 - JCB reports that they have made one of the biggest investments in their history to develop the off-highway sector’s cleanest engine in readiness for incoming emissions legislation.

The company has invested around £80 million (CAD $121 million) in researching and developing a new combustion system for the new JCB Ecomax T4 4.4 litre engine - the latest generation of JCB Dieselmax engines. The company says that the investment has delivered an industry-first solution which eliminates the need for any exhaust after-treatment and delivers cost savings for mid-range customers.

The engine is now undergoing full in-field testing before going into production in 2012 to meet Tier 4 interim/Stage 3B legislation.

The key benefits of the innovation are:
* Reduced fuel consumption
* Reduced cost of ownership
* Better reliability
* Better packaging and no compromise of machine design

Alan Tolley, JCB’s Director of Engine Programmes, said, “Meeting Tier 4 emissions legislation is a massive challenge but also a huge opportunity for innovation; an opportunity to come up with a solution that has real advantages for our customers. We believe the result is not only the off highway sector’s cleanest engine, but a first for our industry.

“The expectation for the first part of Tier 4 interim/Stage 3B legislation was that to achieve these really low particulate levels you needed to fit a Diesel Particulate Filter (DPF).

“But when you look at that technology for our particular part of the market, namely mid-range construction equipment, we see there are some real disadvantages with that solution, in particular increased fuel consumption through increased back pressure to the engine. Also, in many applications load cycles are light and the DPF doesn’t self-regenerate so you have to force it to do so and it needs fuel to do it.

“Our strategy therefore has been to meet Tier 4 interim emission standards without a DPF but also to achieve this without any exhaust after-treatment. We have focused our research and development efforts on a high efficiency combustion system; in other words, we have made sure we don’t create the pollutants to start with rather than try and deal with them later. This approach also gives us very low fuel consumption levels.

“The solution we have come up with gives significant advantages for our customers for packaging and integration. On machines there is not much spare room in the engine compartment and we had a lot of discussion about how to optimize the machines, their design and functionality. The risk with something like Tier 4 is that in order to package everything you have to compromise those elements and we were not willing to do that which is what drove us to pursue a different technology solution.

“One of the advantages we have as a company that makes machines and engines is that we can come up with a final machine product which is better optimized.

“The real end user benefits come in the shape of reduced cost of ownership and reduced fuel consumption and better reliability. We see DPFs as a significant reliability risk; that has certainly been the experience in the automotive sector. We knew the emissions limits were very challenging but we always had the belief and objective of achieving it without putting the onerous burden on our customers.”

Better by design
Since its launch in 2004, the JCB Dieselmax engine has undergone continual development. More than 100,000 engines are now working in the field globally, recording class-leading levels of performance and reliability. The latest developments will see the Dieselmax engines cleanly past the Stage IIIB/Tier 4 Interim legislation that will come into effect for engines of this size in 2012.

As many engines within the 129kW (75-175hp) range are used in plant and equipment that is operated under variable light loads, there can be concerns about Diesel Particulate Filter (DPF) regeneration, with the engine management system having to force the regeneration process by burning additional fuel. This is not only inefficient but can result in additional service requirements, substantial cost increases and the risk of damage to the DPF if a contractor uses a high sulphur fuel.

To achieve the next round of emissions regulations, JCB Power Systems has worked closely with research and development specialist Ricardo, using computational fluid dynamics, finite element analysis and a Ricardo designed combustion bowl to perfect the combustion process.

With second generation common rail fuel injection technology, injection pressures have been raised to 2,000 bar and nozzle hole geometry has been refined to provide highly effective atomisation and distribution of the fuel within the cylinder. JCB has incorporated variable geometry turbochargers on all but the lowest powered 55kW Dieselmax engine, which falls under a slightly different emission regulation. Cooled Exhaust Gas Recirculation (EGR) is also used to clean up the exhaust gases before they are passed from the engine. This means that there is no requirement for any exhaust after-treatment components to meet these emissions levels on the 4.4 litre JCB Ecomax T4 engine.

The company has worked with fuel system and electronics specialist Delphi to develop an electronic control system with a form of learning capacity, that will ensure that the engine stays within its intended parameters even as the components settle throughout their design life.

Benefit to the customer
As well as there being no need to fit a costly exhaust after-treatment system, there has been no requirement to increase the cooling pack size or to reduce service intervals from their standard 500 hours. In addition, under test conditions, the engines have been achieving a 5-10 percent fuel consumption improvement compared to the previous generation.

The engine design is also future-proofed, as the structural architecture, the componentry and systems will remain the same for Stage 4/Tier 4 Final regulations in the future, at which time exhaust after-treatment for NOx reduction may be unavoidable.

Investment in the future
JCB has invested heavily in its Power Systems business in Derbyshire, UK, to meet the requirements of its customers and legislators. The original 4.4 litre Dieselmax 444 engine has been joined by a 4.8 litre Dieselmax 448 version, while power ratings have been extended at both ends of the scale.

JCB Power Systems has increased its research and development team by 40 percent, investing further in the JCB Dieselmax range.

Source : heg.baumpub

Compact Excavators Mature

2010-04-03T17:06:00.000-07:00

Sales of compact excavators have declined from their all-time high of 28,000 in North America in 2007, but manufacturers have not let up improving these little diggers. In fact, many features typically reserved for larger excavators have migrated to the smaller machines.

“When we brought out our D-Series excavators, we made a lot of changes that brought a lot of our technology and experience from large excavators to the small ones,” says John Deere’s Mark Wall, product marketing manager for excavators. “For example, we gave the compact machines two-speed propel with auto-shift in it. So if you’re propelling up a hill and you turn, or put the blade down, the excavator will automatically shift into low and give you higher propel power.

“We also offer auto-idle, which is a take-off from a larger excavator,” says Wall. “If you’re working a machine and then you don’t operate the levers for four or five seconds, the excavator will automatically go into low idle, to conserve fuel. And it reduces noise on the job site.”

Other improvements from Deere include a high-backed suspension seat, cup holders, and 12-V power outlets.

Improved Fuel Efficiency
Bobcat also has auto-shift and auto-idle—and incorporates load-sensing hydraulics into its 3-ton to 4-ton machines. Load-sensing hydraulics spring into action on demand only, says Tom Connor, excavator product specialist with Bobcat. If a hydraulic system is not being used, the pumps de-stroke into a “waiting” mode. That improves the fuel efficiency of the hydraulic system.

Bobcat launched its M-Series of excavators in April 2009, and the new machines boasted an all-new hydraulic system. “We had to do a completely different pump-and-valve package to get to the smoothness and response we were looking for without compromising speed,” says Connor. “And we needed efficiency in hydraulics so we could get by with less horsepower.”

Bobcat’s E32 and E35 compact excavators dropped in engine horsepower, from 40 to 33, to save fuel. “If you look at the list of customer priorities, the price of $4-per-gallon fuel sank in here,” says Connor. “Fuel economy became a driving force in the redesign of the machine.

“Additionally, we continue to expand the use of electric-over-hydraulic technology to accommodate improved ergonomics for operators. For instance, the new E32 and E35 excavators feature thumb-activated boom-swing control.” Bobcat offers 11 different excavator models, and nine of them are compact by definition (less than 6 metric tons).

All manufacturers have upgraded the engines in their compact excavators to comply with the EPA’s exhaust emissions standards. Deere offers five models of compact excavators, and four of them, including the recently introduced 40.5-horsepower Model 60D, all meet Interim Tier 4 standards. The fifth machine, the 14.8-horsepower Model 17D, meets final Tier 4 standards.

Those upgrades require tweaks to the cooling and fuel systems, Wall says.

Other changes at Deere include an angle blade for the 50D excavator. And Deere moved the control of the auxiliary hydraulic system from the right foot to the right-hand pilot lever.

Deere’s 60D excavator is the company’s latest addition to the compact lineup. With a standard arm and rubber tracks, it weighs in at 13,600 pounds and can dig 12 feet, 4 inches deep. With a long arm, the 60D can go 13 feet, 6 inches deep.

New From Caterpillar
Caterpillar offers 10 compact excavators with dig depths ranging from 6.8 feet to 13.7 feet. In 2008, the company upgraded the three largest machines in that range to D Series models—the 307D, the 308D CR, and the 308D CR SB (swing boom).

Source : heavymachineryinfo

Yale's ERP030-040VT and ERP030-040VF lift trucks

2010-04-03T17:04:00.000-07:00

Yale Materials Handling Corp. announces two new electric rider lift truck models—the three-wheel ERP030-040VT and the four-wheel ERP030-040VF. Both models provide lifting capacities of 3,000 to 4,000 pounds.

The highly maneuverable trucks are suitable for a variety of warehouse applications, according to the manufacturer. Their maneuverability is a result of their zero turn radius steer axles and dual AC drive motors. These independent, front-wheel motors rotate the drive tires in opposite directions, which places the center of turn between the drive tires. The lift trucks are available with a 36- or 48-volt, low-maintenance AC traction and hydraulic motor. These brushless AC technology motors provide powerful acceleration and faster travel speeds even with a load, while also supporting quick lift and lower speeds.

The lift trucks also feature four operator performance modes to allow performance to be tailored to the specific application and the operator's ability, increasing overall productivity and efficiency. The trucks' automatic parking brakes set automatically when the vehicle stops, reducing operator motion.

Source : dvelocity

Kubota U55 Tight Tail Swing Compact Excavator

2010-04-02T19:24:00.000-07:00

As the Largest Model in the Kubota U-Series, U55 Provides Power in Confined Work Spaces
Kubota introduces the U55, its largest model in the U-Series of compact excavators. The new Kubota U55 five-ton tight tail swing compact excavator is designed to provide outstanding power while working in tight job sites, where lifting capacity over the front is important. With a medium-length arm that enhances arm crowd force, a wide doorway and plenty of operator space, the U55 now replaces Kubota’s popular KX161 3 compact excavator.

“Contractors find the tight tail swing on the U55 to be the machine’s most attractive feature because it allows the operator to complete jobs quickly in confined work spaces,” said Keith Rohrbacker, Kubota product manager. “In addition, float is now intrinsic to all U55 standard and angle blades, increasing backfilling productivity and simplifying finish work.”

Power and Performance

With only 2.5 inches of tail swing overhang, the U55 is powerful, yet compact enough to operate efficiently and carefully in narrow work spaces; minimizing the chance of harm to panels and reducing long- term operating costs. A 47.6 gross horsepower direct-injection Kubota diesel engine features single-side servicing and includes an auto idle feature that conserves fuel and reduces noise level.

A new, load-sensing hydraulic system employs a combination of closed and open center controls to ensure strong digging forces and minimize “slow down” during travel when using attachments. The advanced load-sensing system provides optimum oil flow to each cylinder for smooth multifunction operation and enhanced fuel economy. Auto downshift travel motors smooth transitions through turns, and the optional hydraulic angle blade improves backfilling efficiency. Float is standard equipment on all blades and combines with high traction force to speed the operator on to the next job. These blades include a reversible bolt-on cutting edge to reduce operating costs.Two auxiliary hydraulics ports are also now available, expanding attachment versatility. This allows the operator to exchange hydraulic attachments and leave the thumb connected at all times, speeding attachment changes. With dual-element air cleaner and side-opening bonnets for convenient access to the service points, the U55 is easy to maintain.

Light, simple movements of the wrist are all that is required to operate the fully hydraulic pilot control system. The auxiliary hydraulics system is equipped with attachment flow presets from the control panel and thumb-ready sticks to speed attachment installation and changes. The U55 uses X-frame construction for high strength and excellent stability. The frame’s angle design has enlarged cleanout ports for easier cleaning that saves valuable time. The number of dual-flanged lower track rollers has been increased in the U55 to reduce vibration for a smoother ride and longer track life. Kubota matched the new three-pump load sensing system with the auto-downshift travel motors flawlessly, creating the ability to make quick, smooth turns.

Working in Comfort and Style

The sleek design of the Kubota U55 includes several features for operator comfort. Entry and exit is easy with wide doors and a large operator space along with optimal legroom. This model offers a comfortable high-back suspension seat and the arm rests can be adjusted to a comfortable position for the operator. Full pilot and ergonomically placed controls optimize well-being and reduce fatigue, improving overall performance.
Advertisement

The U55 features a new digital display panel, conveniently located for clear view and easy access, to provide vital information at a glance, and even notifies the operator when maintenance is due, reducing operating costs. Wide-ranging safety attributes include swivel and travel negative brake systems that hold the house and tracks in place on slopes. These systems simplify transportation and provide almost infinite positioning to improve load spacing. To help ensure optimum operator safety on job sites, all canopy and cab models feature a ROPS / FOPS certification. Even the operator’s investment is protected with Kubota’s own anti-theft system included as standard equipment. This anti-theft system is designed to keep equipment from getting stolen and to help eliminate the expense of theft recovery.

Kubota Tractor Corporation, Torrance, Calif., is the U.S. marketer and distributor of Kubota-branded equipment, including a complete line of tractors up to 118 PTO hp, performance-matched implements, compact and utility-class construction equipment, consumer lawn and garden equipment, commercial turf products and utility vehicles. For product literature or dealer locations, contact Kubota Tractor Corporation at 3401 Del Amo Blvd., Torrance, CA 90503.

Source : gradingandexcavation

Mobile Crane And Materials Handling Equipments an Indispensable Part Of Industry

2010-04-02T19:22:00.000-07:00

In heavy industrial sectors, it is often required to lift up heavy loads and position them precisely. Human beings dont have the right kind of flexibility and physical strength to accomplish this task. So, long ago they felt the need for inventing heavy machinery that could carry out these tasks at much ease. As the proverb goes, necessity is the mother of invention, so crane was invented to ease out our problems.

Overtime, simple designed cranes have made a slow transition into complex ones. Modern technology is trying its best to equip mobile cranes with newer features in order to make them more users friendly. Nowadays, they are not only armed with advanced features but also available in eye catching colors. A perfect combination of appealing outlook and intricate design are what industry is in quest of.

High capacity mobile cranes can easily haul up loads as heavy as 150Kg. precise positioning of items is one of the prominent features of these cranes. These cranes are even capable of functioning in a very tight space. They are supplied with tremendous speed controlling system in forward as well as reverse direction. Co-existence of manual lift and powered lift has facilitated its precise functioning to large extent.

Several mobile cranes manufacturers are in the market vying for marketing more innovatively designed mobile cranes of their owns. With time passing by, industry is witnessing a series of mobile cranes each of which is a perfect example of hi-fi technology and high-end functionality.

There is an array ofmaterials handling manufacturers in the market. Each of them is jostling for a big pie of the booming market and claiming for high quality of their products. Material handling is an integral part of industry. These items are especially designed for accomplishing subtle and sophisticated works. There is a lot of material handling equipments namely bin activator , belt conveyor, bucket elevator, bag dump station, dust collectors, diverter values, lump breakers, screw conveyor etc. etc.

Materials handling equipments are in great demand in heavy engineering sectors where it is not possible to handle bulky equipments manually. Thanks to Innovation of high-tech materials handling equipments, the apparent impossible task has become very much possible with those items. Sky is the limit for innovators and so there is no stop to integrating modern features into these equipments.

Source : articlesnatch

Caterpillar 569 SM/EHC Stationary Mount Knuckleboom Loader

2010-03-25T15:31:00.001-07:00

Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.

Specifications

Units: US | Metric

Engine
Gross Power
74.6 kW
100 hp

Operating Specifications
Knuckleboom Length
9.9 m
32.5 ft

Grapple Mounting Knuckle Length
228.6 mm
9 in

Swing Bearing Diameter
1371.6 mm
54 in

Source : cat

Caterpillar 569 SM Stationary Mount Knuckleboom Loader

2010-03-25T15:28:00.000-07:00

Caterpillar 519 SM/EHC Stationary Mount Knuckleboom Loader

2010-03-25T15:24:00.000-07:00

519 SM/EHC Stationary Mount Knuckleboom Loader
Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.

Specifications

Units: US | Metric

Engine
Gross Power
55.9 kW
75 hp

Operating Specifications
Knuckleboom Length
8.2 m
27 ft

Grapple Mounting Knuckle Length
228.6 mm
9 in

Swing Bearing Diameter
1092.2 mm
43 in

Source : cat

Caterpillar 519 SM Stationary Mount Knuckleboom Loader

2010-03-25T15:21:00.000-07:00

Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.

Specifications

Units: US | Metric

Engine
Gross Power
55.9 kW
75 hp

Operating Specifications
Knuckleboom Length
8.2 m
27 ft

Grapple Mounting Knuckle Length
228.6 mm
9 in

Swing Bearing Diameter
1092.2 mm
43 in

Source : cat

Caterpillar 414E Industrial Loader

2010-03-25T15:18:00.000-07:00

With a comfortable operator station, joystick implement controls, integrated three-point tool carrier and outstanding performance, the 414E IL lets you get more done with less effort.

Specifications

Units: US | Metric

Engine

Net Power - SAE J1349
66 kW
89 hp

Engine Model
Cat® 3054C DIT

Gross Power - SAE J1995
69 kW
93 hp

Source : cat

Privacy Policy

2010-03-22T19:44:00.001-07:00

Privacy Policy for http://heavyequipmentforbuild.blogspot.com/

If you require any more information or have any questions about our privacy policy, please feel free to contact us by email at agung.lee78@gmail.com.

At http://heavyequipmentforbuild.blogspot.com/, the privacy of our visitors is of extreme importance to us. This privacy policy document outlines the types of personal information is received and collected by http://heavyequipmentforbuild.blogspot.com/ and how it is used.

Log Files
Like many other Web sites, http://heavyequipmentforbuild.blogspot.com/ makes use of log files. The information inside the log files includes internet protocol ( IP ) addresses, type of browser, Internet Service Provider ( ISP ), date/time stamp, referring/exit pages, and number of clicks to analyze trends, administer the site, track user’s movement around the site, and gather demographic information. IP addresses, and other such information are not linked to any information that is personally identifiable.

Cookies and Web Beacons
http://heavyequipmentforbuild.blogspot.com/ does use cookies to store information about visitors preferences, record user-specific information on which pages the user access or visit, customize Web page content based on visitors browser type or other information that the visitor sends via their browser.

DoubleClick DART Cookie
.:: Google, as a third party vendor, uses cookies to serve ads on http://heavyequipmentforbuild.blogspot.com/.
.:: Google's use of the DART cookie enables it to serve ads to users based on their visit to http://heavyequipmentforbuild.blogspot.com/ and other sites on the Internet.
.:: Users may opt out of the use of the DART cookie by visiting the Google ad and content network privacy policy at the following URL - http://www.google.com/privacy_ads.html

Some of our advertising partners may use cookies and web beacons on our site. Our advertising partners include ....
Google Adsense

These third-party ad servers or ad networks use technology to the advertisements and links that appear on http://heavyequipmentforbuild.blogspot.com/ send directly to your browsers. They automatically receive your IP address when this occurs. Other technologies ( such as cookies, JavaScript, or Web Beacons ) may also be used by the third-party ad networks to measure the effectiveness of their advertisements and / or to personalize the advertising content that you see.

http://heavyequipmentforbuild.blogspot.com/ has no access to or control over these cookies that are used by third-party advertisers.

You should consult the respective privacy policies of these third-party ad servers for more detailed information on their practices as well as for instructions about how to opt-out of certain practices. http://heavyequipmentforbuild.blogspot.com/'s privacy policy does not apply to, and we cannot control the activities of, such other advertisers or web sites.

If you wish to disable cookies, you may do so through your individual browser options. More detailed information about cookie management with specific web browsers can be found at the browsers' respective websites.

Caterpillar 385C Ultra High Demolition (UHD) Hydraulic Excavator

2010-03-18T23:19:00.000-07:00

Caterpillar engineers have designed and produced specialized machines with the objective of increasing productivity at every stage of the process. Added to that, our machines have been developed with an emphasis on stability, durability and ease of use. They also come with the backing of your local Cat® dealer. They can help you with finding the right machine and tools for the job and advise you how to get the most out of your equipment.
Specifications

Units: US | Metric

Engine

Engine Model
Cat® C18 ACERT™

Net Power
390 kW
530 hp

Ratings
1800 RPM
1800 RPM

Weights

Operating weight
98700 kg
217596 lb

Max tool weight (over the front)
3000 kg
6614 lb

Max tool weight (360°)
2100 kg
4630 lb

Source : cat

Caterpillar 365C Ultra High Demolition (UHD) Hydraulic Excavators

2010-03-18T23:16:00.000-07:00

Caterpillar engineers have designed and produced specialized machines with the objective of increasing productivity at every stage of the process. Added to that, our machines have been developed with an emphasis on stability, durability and ease of use. They also come with the backing of your local Cat® dealer. They can help you with finding the right machine and tools for the job and advise you how to get the most out of your equipment.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C15 ACERT™

Net Power
302 kW
411 hp

Ratings
2000 RPM
2000 RPM

Weights

Operating weight
85700 kg
188936 lb

Max tool weight (over the front)
3000 kg
6614 lb

Max tool weight (360°)
2000 kg
4409 lb

Source : cat

Caterpillar 345C Ultra High Demolition (UHD) Hydraulic Excavator

2010-03-18T23:13:00.000-07:00

Caterpillar engineers have designed and produced specialized machines with the objective of increasing productivity at every stage of the process. Added to that, our machines have been developed with an emphasis on stability, durability and ease of use. They also come with the backing of your local Cat® dealer. They can help you with finding the right machine and tools for the job and advise you how to get the most out of your equipment.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C13 ACERT™

Net Power
239 kW
325 hp

Ratings
1800 RPM
1800 RPM

Weights

Operating weight
67000 kg
147710 lb

Max tool weight (over the front)
2500 kg
5512 lb

Max tool weight (360°)
2500 kg
5512 lb

Source : cat

Caterpillar 330D UHD Hydraulic Excavator

2010-03-18T23:10:00.000-07:00

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C9 ACERT™

Net Power
200 kW
270 hp

Ratings
1800 RPM
1800 RPM

Weights

Operating weight
47900 kg
105601 lb

Max tool weight (over the front)
3000 kg
6614 lb

Max tool weight (360°)
2700 kg
5953 lb

Source : cat

Caterpillar 385C L Hydraulic Excavator

2010-03-18T23:08:00.000-07:00

The 385C L Series excavator has excellent control, high stick and bucket forces, impressive lift capacity, simplified service and a more comfortable operator station to increase your productivity and lower operating costs.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C18 ACERT™

Net Flywheel Power
382 kW
513 hp

Net Power - ISO 9249
382 kW
513 hp

Source : cat

Caterpillar 365C L Hydraulic Excavator

2010-03-18T23:05:00.000-07:00

The 365C L Series excavator has excellent control, high stick and bucket forces, impressive lift capacity, simplified service and a more comfortable operator station to increase your productivity and lower operating costs.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C15 ACERT™

Net Flywheel Power
302 kW
404 hp

Net Power - ISO 9249
302 kW
404 hp

Source : cat

Caterpillar 345D L Hydraulic Excavator

2010-03-18T23:02:00.000-07:00

The 345D L offers outstanding performance, excellent control, high stick and bucket forces, impressive lift capacity, simplified service and a comfortable operator station to increase your productivity and lower operating costs.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C13 ACERT™

Net Flywheel Power
283 kW
380 hp

Net Power - ISO 9249
283 kW
380 hp

Source : cat

Caterpillar 324D L Hydraulic Excavator

2010-03-18T22:59:00.000-07:00

The new 324D is a true performer with the versatility to be utilized in many different applications. The hydraulic system has been designed to provide reliability and outstanding controllability. An optional Tool Control System provides additional flexibility.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C7 ACERT™

Net Flywheel Power
140 kW
188 hp

Net Power - ISO 9249
140 kW
188 hp

Source : cat

Caterpillar 320D LRR Hydraulic Excavator

2010-03-18T22:56:00.000-07:00

Increased work tool options, new powerful engine and easier operation lead to increased productivity and lower operating costs.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C6.4 ACERT™

Net Flywheel Power
110 kW
148 hp

Net Power - ISO 9249
110 kW
148 hp

Source : cat

Caterpillar 328D LCR Hydraulic Excavator

2010-03-18T22:53:00.000-07:00

Increased work tool options, new powerful engine and easier operation lead to increased productivity and lower operating costs.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C7 ACERT™

Net Flywheel Power
152 kW
204 hp

Net Power - ISO 9249
152 kW
204 hp

Source : cat

Caterpillar 329D L Hydraulic Excavator

2010-03-18T22:51:00.001-07:00

The new 329D incorporates innovations for improved performance and versatility. The new C7 engine with ACERT™ Technology works at the point of combustion to optimize engine performance and provide low exhaust emissions to meet the emission regulations, with exceptional performance capabilities and proven reliability.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C7 ACERT™

Net Flywheel Power
152 kW
204 hp

Net Power - ISO 9249
152 kW
204 hp

Source : cat

Caterpillar 321D LCR Hydraulic Excavator

2010-03-18T22:47:00.000-07:00

Caterpillar 320D L Hydraulic Excavator

2010-03-18T22:45:00.000-07:00

Caterpillar 336D L Hydraulic Excavator

2010-03-18T22:42:00.001-07:00

The new 336D is specifically designed to maximize productivity and to maximize our customer’s output. The new Cat C9 engine with ACERT Technology offers better fuel efficiency and reduced wear. The hydraulic system has been designed to provide maximum reliability with maximum hydraulic horsepower.

Specifications

Units: US | Metric

Engine

Engine Model
Cat® C9 ACERT™

Net Flywheel Power
200 kW
268 hp

Net Power - ISO 9249
200 kW
268 hp

Source : cat

Truck-mounted boom pump Schwing America, Inc.

2010-03-01T01:16:00.000-08:00

The S 32 X has a four-section Roll and Fold boom which reaches 105-feet vertically with 125mm pipeline. The standard pump kit is the fuel efficient 2025-5 120/80 MPS, providing 178 cubic yards per hour and 1,233 psi at 23 strokes per minute. Open-loop hydraulics provide worry-free operation and continuous pumping. Also standard are Schwing's exclusive Vector controls, providing two way communication between pump and operator. Real time messaging makes trouble shooting fast and easy. Extensive operating data is displayed to help fleet managers and owners track maintenance and machine performance. A field proven, frequency-hopping radio ensures interference-free and long-range operation.

Source : heg.baumpub.com

Caterpillar 319D L/319D LN Hydraulic Excavator

2010-03-01T01:09:00.000-08:00

Achieve high productivity and lower operating costs with the Cat® 319D L/319D LN Hydraulic Excavator. Unmatched versatility, improved controllability, easy operation and a comfortable, redesigned operator station help make the 319D an industry-leading performer.

Specifications

Units: US | Metric

Engine
Engine Model
Cat® C4.2 ACERT™

Flywheel Power
93 kW
125 hp

Gross Power
98 kW
131 hp

Source : cat

Caterpillar 315D L Hydraulic Excavator

2010-03-01T01:06:00.000-08:00

Increased horsepower, improved controllability and a comfortable, redesigned operator station help make the Cat® 315D L Hydraulic Excavator an industry-leading performer. Easy to operate with unmatched versatility, the 315D L will help increase productivity and lower operating costs.

Specifications

Units: US | Metric

Engine
Engine Model
Cat® C4.2 ACERT™

Flywheel Power
86 kW
115 hp

Gross Power
91 kW
122 hp

Source : cat

Caterpillar 314D CR/314D LCR Hydraulic Excavator

2010-03-01T01:02:00.000-08:00

Achieve high productivity and lower opearting costs with the Cat® 314D Hydraulic Excavator. Unmatched versatility, improved controllability, easy operation and a comfortable, redesigned operator station help make the 314D an industry-leading performer.

Specifications

Units: US | Metric

Engine
Engine Model
Cat® C4.2 ACERT™

Flywheel Power
67 kW
90 hp

Gross Power
72 kW
97 hp

Source : cat

Caterpillar 312D/312D L Hydraulic Excavator

2010-03-01T00:59:00.000-08:00

Achieve high productivity and lower operating costs with the Cat® 312D Hydraulic Excavator. Unmatched versatility, improved controllability, easy operation and a comfortable, redesigned operator station help make the 312D an industry-leading performer.

Specifications

Units: US | Metric

Engine
Engine Model
Cat® C4.2 ACERT™

Flywheel Power
67 kW
90 hp

Gross Power
72 kW
97 hp

Source : cat

Caterpillar 311D LRR Hydraulic Excavator

2010-03-01T00:56:00.000-08:00

Achieve high productivity and lower operating costs with the Cat® 311D LRR Hydraulic Excavator. Unmatched versatility, controllability, easy operation and a comfortable, redesigned operator station help make the 311D LRR an industry-leading performer.

Specifications

Units: US | Metric

Engine
Engine Model
Cat® C4.2 ACERT™

Flywheel Power
60 kW
80 hp

Gross Power
64 kW
86 hp

Source : cat

Caterpillar 308D CR SB Hydraulic Excavator

2010-03-01T00:50:00.000-08:00

The 308D CR SB Mini Hydraulic Excavator delivers superior performance and comfort while reducing your operating costs. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The compact radius design allows jobsite work where other machines cannot operate--significantly impacting your bottom line. This swing boom version increases machine and customer versatility by allowing the operator to dig box sections without repositioning the machine. The swing boom also allows you to accurately and safely dig along obstacles like fences, walls and buildings. The 308D CR SB will set the standard for swing boom excavators in the eight-ton size class.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi 4M40 TL

Net power
41.5 kW
55.6 hp

Gross power
43 kW
57.6 hp

Weights
Operating weight
8400 kg
18519 lb

Operating weight with cab
8400 kg
18519 lb

Dimensions
Max digging depth - standard stick
4180 mm
13.7 ft

Max reach ground level - standard stick
6900 mm
22.6 ft

Engine Dimensions
Bore
95 mm
3.7 in

Stroke
100 mm
3.9 in

Displacement
2.83 L
173 in3

Travel System
Travel speed - high
5 km/h
3.1 mph

Travel speed - low
3.1 km/h
1.9 mph

Gradeability (max) - high
35 Degrees
35 Degrees

Hydraulic System
Operating pressures - equipment
280 bar
4061 psi

Operating pressure - travel
320 bar
4641 psi

Operating pressure - swing
240 bar
3481 psi

Source : cat

Caterpillar 308D CR Hydraulic Excavator

2010-03-01T00:46:00.000-08:00

The Cat 308D CR Mini Hydraulic Excavator delivers superior performance and comfort while reducing your operating costs. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The compact radius design allows jobsite work where other machines cannot operate--significantly impacting your bottom line. The 308D CR sets the standard for excavators in the eight-ton size class.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi 4M40 TL

Net power
41.5 kW
55.6 hp

Gross power
43 kW
57.6 hp

Weights
Operating weight
7850 kg
17306 lb

Operating weight with cab
7850 kg
17306 lb

Dimensions
Max digging depth - standard stick
4090 mm
13.4 ft

Max reach ground level - standard stick
6190 mm
20.3 ft

Engine Dimensions
Bore
95 mm
3.7 in

Stroke
100 mm
3.9 in

Displacement
2.83 L
173 in3

Travel System
Travel speed - high
5 km/h
3.1 mph

Travel speed - low
3.1 km/h
1.9 mph

Gradeability (max) - high
35 Degrees
35 Degrees

Hydraulic System
Operating pressures - equipment
280 bar
4061 psi

Operating pressure - travel
320 bar
4641 psi

Operating pressure - swing
240 bar
3481 psi

Source : cat

Caterpillar 307D Hydraulic Excavator

2010-03-01T00:43:00.000-08:00

The Cat 307D Mini Hydraulic Excavator delivers superior performance and comfort while reducing your operating costs. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The standard tail swing design incorporates a counterweight that extends further back on the machine. This provides leverage to create a stable work platform during lifting and digging. The 307D sets the standard for conventional tail swing excavators in the eight-ton size class.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi 4M40 TL

Net power
41.5 kW
55.6 hp

Gross power
43 kW
57.6 hp

Weights
Operating weight
7075 kg
15598 lb

Operating weight with cab
7075 kg
15598 lb

Dimensions
Max digging depth - standard stick
4050 mm
13.3 ft

Max reach ground level - standard stick
6150 mm
20.2 ft

Engine Dimensions
Bore
95 mm
3.7 in

Stroke
100 mm
3.9 in

Displacement
2.83 L
173 in3

Travel System
Travel speed - high
5 km/h
3.1 mph

Travel speed - low
3.1 km/h
1.9 mph

Gradeability (max) - high
35 Degrees
35 Degrees

Hydraulic System

Operating pressures - equipment
280 bar
4061 psi

Operating pressure - travel
320 bar
4641 psi

Operating pressure - swing
240 bar
3481 psi

Source : cat

Caterpillar 305C CR Mini Hydraulic Excavator

2010-03-01T00:36:00.000-08:00

Engineered by Caterpillar to deliver high levels of productivity, versatility and serviceability

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi S4Q2-T

Net power
35 kW
47 hp

Gross power
36.2 kW
48.5 hp

Weights
Operating weight
5200 kg
11464 lb

Operating weight with cab
5320 kg
11725 lb

Dimensions
Max digging depth - standard stick
3490 mm
11.4 ft

Max reach ground level - standard stick
5650 mm
18.6 ft

Engine Dimensions
Bore
88 mm
3.5 in

Stroke
103 mm
4.1 in

Displacement
2.5 L
153 in3

Travel System
Travel speed - high
4.6 km/h
2.9 mph

Travel speed - low
2.6 km/h
1.6 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Operating pressures - equipment
245 bar
3553 psi

Operating pressure - travel
245 bar
3553 psi

Operating pressure - swing
184 bar
2669 psi

Source : cat

Caterpillar 304C CR Mini Hydraulic Excavator

2010-03-01T00:32:00.000-08:00

Engineered by Cat to deliver high levels of productivity, versatility and serviceability.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi S4Q2

Net power
31 kW
42 hp

Gross power
32.2 kW
43.2 hp

Weights
Operating weight
4800 kg
10582 lb

Operating weight with cab
4920 kg
10844 lb

Dimensions
Max digging depth - standard stick
3300 mm
10.8 ft

Max reach ground level - standard stick
5460 mm
17.9 ft

Engine Dimensions
Bore
88 mm
3.5 in

Stroke
103 mm
4.1 in

Displacement
2.5 L
153 in3

Travel System
Travel speed - high
4.6 km/h
2.9 mph

Travel speed - low
2.6 km/h
1.6 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Operating pressures - equipment
245 bar
3553 psi

Operating pressure - travel
245 bar
3553 psi

Operating pressure - swing
176 bar
2553 psi

Source : cat

Caterpillar 303.5C CR Mini Hydraulic Excavator

2010-02-25T15:00:00.000-08:00

Engineered by Cat to deliver high levels of productivity, versatility and serviceability .

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi S3Q2-T

Net power
29 kW
39 hp

Gross power
30.2 kW
40.5 hp

Weights
Operating weight
3790 kg
8356 lb

Operating weight with cab
3910 kg
8620 lb

Dimensions
Max digging depth - standard stick
3150 mm
10.3 ft

Max reach ground level - standard stick
5240 mm
17.2 ft

Engine Dimensions
Bore
88 mm
3.5 in

Stroke
103 mm
4.1 in

Displacement
1.9 L
116 in3

Travel System
Travel speed - high
4.6 km/h
2.9 mph

Travel speed - low
2.6 km/h
1.6 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Operating pressures - equipment
245 bar
3553 psi

Operating pressure - travel
245 bar
3553 psi

Operating pressure - swing
181 bar
2625 psi

Source : cat

Caterpillar 303C CR Mini Hydraulic Excavators

2010-02-25T14:56:00.001-08:00

Engineered by Caterpillar to deliver high levels of productivity, versatility and serviceability.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi S3Q2

Net power
22 kW
30 hp

Gross power
23 kW
31 hp

Weights
Operating weight
3435 kg
7573 lb

Operating weight with cab
3555 kg
7835 lb

Dimensions
Max digging depth - standard stick
2910 mm
9.6 ft

Max reach ground level - standard stick
5100 mm
16.8 ft

Engine Dimensions
Bore
88 mm
3.5 in

Stroke
103 mm
4.1 in

Displacement
1.9 L
116 in3

Travel System
Travel speed - high
4.6 km/h
2.9 mph

Travel speed - low
2.6 km/h
1.6 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Operating pressures - equipment
245 bar
3553 psi

Operating pressure - travel
245 bar
3553 psi

Operating pressure - swing
172 bar
2495 psi

Source : cat

Volvo Construction Equipment expands road product line

2010-02-20T17:33:00.000-08:00

February 18, 2010 - Volvo Construction Equipment and VT LeeBoy have finalized a strategic alliance agreement for LeeBoy to supply certain pavers and road wideners to Volvo dealers under the Blaw-Knox brand. LeeBoy will also take full responsibility for product support of these machines, including the existing field population.

The equipment will be marketed under the Blaw-Knox brand under a five-year brand licensing agreement with Volvo Construction Equipment and distributed through Volvo road machinery dealers who will thus maintain access to these models in order to continue serving their customers in a variety of road development operations.

“The agreement with LeeBoy enables Volvo to concentrate its road machinery technical and engineering expertise and production operations on high-volume Volvo paving, compaction and motor grader equipment that serves our industrial and commercial customer bases,” said Göran Lindgren, president of Volvo Construction Equipment North America. “In addition, this strong relationship fosters other growth opportunities for the Blaw-Knox brand, which will give Volvo Construction Equipment dealers in North America, Australia and New Zealand access to the broadest product offering of any manufacturer in the asphalt paving industry.”

Production of upgraded and redesigned Blaw-Knox road wideners (models RW100 and RW195D) and pavers (models PF150 and PF161) is expected to begin within the next few months at the LeeBoy production facilities in Lincolnton, North Carolina.

“It is with a great deal of pride that we have announced the agreement to our employees. Blaw-Knox is one of the most prominent road building brands in North America. We look forward to working with the Volvo Construction Equipment distribution channel to provide Blaw-Knox commercial pavers and road wideners for their customers,” said LeeBoy’s president and CEO, Kelly Majeskie.

Volvo Construction Equipment, one of the world’s largest manufacturers of construction equipment and road machinery, acquired the Blaw-Knox product line in its purchase of the Ingersoll Rand road machinery business in 2007.

Source : volvo via baumpub

Caterpillar 302.5C Mini Hydraulic Excavator

2010-02-20T17:21:00.000-08:00

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi S3L2 NA Diesel

Net power
18.6 kW
24.9 hp

Gross power
19.9 kW
26.7 hp

Weights
Operating weight
2745 kg
6052 lb

Operating weight with cab
2850 kg
6283 lb

Dimensions
Max digging depth - standard stick
2640 mm
8.66 ft

Max reach ground level - standard stick
4545 mm
14.91 ft

Engine Dimensions
Bore
78 mm
3.1 in

Stroke
92 mm
3.6 in

Displacement
1.3 L
80.4 in3

Travel System
Travel speed - high
5 km/h
3.1 mph

Travel speed - low
2.5 km/h
1.6 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System

Pump - gear (tandem)
31.2 L/min
8.2 gal/min

Pump - gear (single)
18.4 L/min
4.9 gal/min

Operating pressures - equipment
221 bar
3205 psi

Source : cat

Caterpillar 301.8C Mini Hydraulic Excavator

2010-02-20T17:17:00.000-08:00

The Caterpillar 301.8 Hydraulic Excavator provides the customer with a versatile machine with further increased stability and suitable for a wide range of applications requiring a longer reach with Caterpillar Work Tools. The 301.8 is versatile, easy to operate and service, and has options to rent, lease or own.

Specifications

Units: US | Metric

Engine

Engine model
Mitsubishi L3NE NA Diesel

Net power
13.5 kW
18.1 hp

Gross power
14 kW
19 hp

Weights
Operating weight
1680 kg
3703 lb

Operating weight with cab
1785 kg
3935 lb

Dimensions
Max digging depth - standard stick
2080 mm
6.8 ft

Max reach ground level - standard stick
3610 mm
11.8 ft

Engine Dimensions
Bore
76 mm
3 in

Stroke
70 mm
3 in

Displacement
0.95 L
58 in3

Travel System
Travel speed - high
4.5 km/h
3 mph

Travel speed - low
2 km/h
1.25 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Pump - gear (tandem)
19.8 L/min
5.25 gal/min

Pump - gear (single)
14.6 L/min
3.85 gal/min

Operating pressures - equipment
206 bar
2988 psi

Source : cat

301.6C Mini Hydraulic Excavators

2010-02-12T14:39:00.000-08:00

Engineered Durability The heavy-duty structures and clean lines of the Cat 301.6C and 301.8C ensure long life and reduce maintenance costs in tough, demanding applications.

Specifications

Units: US | Metric

Engine
Engine model
Mitsubishi L3E NA Diesel

Net power
13.5 kW
18.1 hp

Gross power
14 kW
19 hp

Weights
Operating weight
1610 kg
3549 lb

Operating weight with cab
1720 kg
3792 lb

Dimensions
Max digging depth - standard stick
2080 mm
6.8 ft

Max reach ground level - standard stick
3610 mm
11.8 ft

Engine Dimensions
Bore
76 mm
3 in

Stroke
70 mm
2.8 in

Displacement
0.95 L
58.1 in3

Travel System
Travel speed - high
4.5 km/h
2.8 mph

Travel speed - low
2 km/h
1.25 mph

Gradeability (max) - high
30 Degrees
30 Degrees

Hydraulic System
Pump - gear (tandem)
19.8 L/min
5.25 gal/min

Pump - gear (single)
14.6 L/min
3.85 gal/min

Operating pressures - equipment
206 bar
2988 psi

Source : cat

Research and Markets add 2008 report on construction and mining to offering

2010-02-09T13:33:00.000-08:00

RESEARCH and Markets recently announced the addition of Global Industry Analysts’ 2008 global strategic business report on construction and mining machinery.

According to the international market research company, the report analyses the global markets for construction and mining machinery/equipment in units and US$ million. Annual forecasts are provided for the period of 2000 through 2015, for the regions of US, Canada, Japan, China, Europe, and Rest of World.

Specific product segments analysed are said to include mini excavators, wheeled loaders, crawler excavators, skid steer loaders, and backhoe loaders.

Research and Markets says the report profiles 359 companies including Caterpillar, CNH Global, Doosan Infracore, Hitachi Construction Machinery, JCB, JLG Industries, Komatsu, Kubota Europe, Liebherr Group, MANITOU Group, Mitsubishi Heavy Industries, and Sakai Heavy Industries.

Companies which are also profiled within the global strategic business report include Sumitomo Heavy Industries, TCM Corporation, Terex Corp, and Volvo Construction Equipment.

Source : earthmovingnews

Caterpillar becomes the first heavy equipment manufacturer to purchase a MMP Portfolio

2010-02-09T13:30:00.000-08:00

CATERPILLAR Inc. recently became the 70th Moore Microprocessor Patent (MMP) Licensee, after purchasing a MMP Portfolio license from The TPL Group.

According to Patriot Scientific Corporation (PTSC), with the purchase CATERPILLAR is the first heavy equipment manufacturer to purchase a license since the MMP Licensing Program launched in 2005.

The MMP Portfolio is said to contain intellectual property which is jointly owned by the privately-held TPL Group and publicly-held PTSC. The Portfolio includes seven US patents as well as their European and Japanese counterparts.

PTSC says the MMP Portfolio is widely recognized to protect the fundamental technology used in microprocessors, microcontrollers, digital signal processors (DSPs), embedded processors and system-on-chip (SoC) devices.

Source : earthmovingnews

Caterpillar medium wheel loaders a machine refinement five decades strong

2010-02-09T13:27:00.000-08:00

CATERPILLAR says medium wheel loaders have been the Foundation of its wheel loader range for 50 Years, with the first unit driven off the assembly line in 1959.

According to CATERPILLAR, its first production wheel loader was the 944 Wheel Traxcavator, which features a 1.5 cubic meter bucket and was available with either a 105hp gas or diesel engine.

Cat says its wheel loaders have been refined over the past five decades, with the current eight-model lineup of medium machines remaining as the foundation of the line and serves the largest market segment. The models range from 938H, IT38H, 950H, 962H, IT62H, 966H, and 972H to the 980H.

The above CATERPILLAR medium wheel loaders offer 2.3 to 6.1 cubic meter standard buckets and can be fitted with a wide range of attachments.

Source : earthmovingnews

Caterpillar 552 Track Harvester

2010-02-05T05:51:00.000-08:00

A robust, reliable undercarriage utilizes proven components, customized for the most rugged forestry conditions. The unique boom design provides industry leading lift capacity throughout full reach range, a benefit in large timber. Three models are available with just the right horsepower, track size and hydraulic configurations to fit your application needs.

Specifications

Units: US | Metric

Gross Power
305 hp
227.4 kW

Engine Model
Cat® C9 ACERT™

Rated Power
282 hp

Source : cat

Caterpillar 551 Track Harvester

2010-02-05T05:44:00.000-08:00

Caterpillar 541 Track Harvester

2010-02-05T05:41:00.000-08:00

Caterpillar 532 Track Harvester

2010-02-05T05:35:00.000-08:00

All Caterpillar Track Feller Bunchers can be configured with factory installed Harvester linkages and hydraulic packages. These machines are available in a mix of Zero Tail Swing (ZTS), Full Tail Swing (FTS), Leveling, and Non-leveling models for any harvesting application.

Specifications

Units: US | Metric

Gross Power
284 hp
211.8 kW

Engine Model
Cat® C9 ACERT™

Rated Power
263 hp

Source : cat

Caterpillar 522 Track Harvester

2010-02-05T05:32:00.000-08:00

Caterpillar 521 Track Harvester

2010-02-05T05:24:00.000-08:00

Caterpillar 511 Track Harvester

2010-02-05T05:19:00.001-08:00

All Caterpillar Track Feller Bunchers can be configured with factory installed Harvester linkages and hydraulic packages. These machines are available in a mix of Zero Tail Swing (ZTS), Full Tail Swing (FTS), Leveling, and Non-leveling models for any harvesting application.

Specifications

Units: US | Metric

Gross Power
247 hp
184.2 kW

Engine Model
Cat® C9 ACERT™

Rated Power
228 hp
170 kW

Source : cat

Caterpillar 501 HD Track Harvester

2010-02-05T05:15:00.000-08:00

Equipped with dependable Cat engines, load sensing hydraulics, and factory installed attachments, Caterpillar track harvesters offer the perfect solution for any cut-to-length application.

Specifications

Units: US | Metric

Gross Power
157 hp
117 kW

Engine Model
Cat® C6.6 ACERT

Hydraulic Oil Flow
81 gal/min
307 L/min

Source : cat

Caterpillar 501 Track Harvester

2010-02-05T05:12:00.000-08:00

Caterpillar 550 Wheel Harvester

2010-02-05T05:09:00.001-08:00

The 550 Wheel Harvester features engineered versatility that provides solid footing and level working conditions in extreme forestry conditions.

Specifications

Units: US | Metric

Gross Power
197 hp
147 kW

Reach - max
27 ft
8.23 m

Operating Weight - Est
47040 lb
21319 kg

Source : cat

Caterpillar 574 Forwarder

2010-02-01T15:41:00.000-08:00

Caterpillar forwarders have proven, over-sized components including heavy-duty axles and torque converted power shift transmission. The spacious, comfortable operator station is designed for exceptional visibility.

Specifications

Units: US | Metric

Gross Power
174 hp
130 kW

Flywheel Power
154.22 hp
115 kW

Engine Model
Cat® 3056E DITAAC

Source : cat

Caterpillar 584 and 584HD Forwarders

2010-02-01T15:38:00.000-08:00

The Cat 584 forwarder meets the demanding requirements of forest harvesting in many variable applications. These structurally superior units provide unbeaten comfort, controllability, and serviceability to get the job done in a safe, productive, and efficient manner.

Specifications

Units: US | Metric

Gross Power
274 hp
204 kW

Engine Model
Cat C7 ACERT™

Load Capacity
39683 lb

Source : cat

Caterpillar 564 Forwarder

2010-02-01T15:35:00.000-08:00

Caterpillar forwarders have proven, over-sized components including heavy-duty axles and torque converted power shift transmission. The spacious, comfortable operator station is designed for exceptional visibility.

Specifications

Units: US | Metric

Gross Power
174 hp
130 kW

Engine Model
Cat® C6.6 ACERT

Load Capacity
30000 lb
13608 kg

Source : cat

Caterpillar 330D FM Forest Machine

2010-02-01T15:32:00.000-08:00

The D-Series Forest Machines are powered with ACERT® Technology and Caterpillar quality from undercarriage to grapple. These rugged, state-of-the-art forest machines provide both reliability and durability for the most demanding logging environments.

Specifications

Units: US | Metric

Engine Model
Cat® C9 ACERT®

Net Flywheel Power
268 hp
200 kW

ISO 9249
268 hp

Source : cat

Caterpillar 325D FM Forest Machine

2010-02-01T15:31:00.000-08:00

The D-Series Forest Machines are powered with ACERT® Technology and Caterpillar quality from undercarriage to grapple. These rugged, state-of-the-art forest machines provide both reliability and durability for the most demanding logging environments.

Specifications

Units: US | Metric

Engine Model
Cat® C7 ACERT™

Net Flywheel Power
204 hp
152 kW

ISO 9249
204 hp

Source : cat

Caterpillar 324D FM Forest Machine

2010-02-01T15:28:00.001-08:00

The D-Series Forest Machines are powered with ACERT® Technology and Caterpillar quality from undercarriage to grapple. These rugged, state-of-the-art forest machines provide both reliablity and durablility for the most demanding logging environments.

Specifications

Units: US | Metric

Engine Model
Cat® C7 ACERT™

Net Flywheel Power
188 hp
140 kW

ISO 9249
188 hp

Source : cat

Caterpillar 320D FM Forest Machine

2010-02-01T15:25:00.000-08:00

The D-Series Forest Machines are powered with ACERT® Technology and Caterpillar quality from undercarriage to grapple. These rugged, state-of-the-art forest machines provide both reliability and durability for the most demanding logging environments.

Specifications

Units: US | Metric

Engine Model
Cat® C6.4 ACERT™

Net Flywheel Power
157 hp
117 kW

ISO 9249
147 hp

Source : cat

Tighter emission levels challenge the construction machinery industry

2010-01-28T17:47:00.000-08:00

Innovations to be presented at bauma 2010

A major theme among the innovations to be expected at bauma 2010 in Munich will be cross-sector approaches to reducing emissions. The International Trade Fair for Construction Machinery, Building Material Machines, Mining Machines, Construction Vehicles and Construction Equipment is taking place just a few months before new emissions directives come into force: from 2011, with the Stage III B Directive 97/68/EC and Tier 4 US emissions legislation, new interim limits will apply to emissions from non-road vehicles, such as excavators and compaction rollers. For example, particulate levels are to be reduced by up to 94 percent in comparison to the current Stage III A.

Exhaust after-treatment absolutely imperative
In order to achieve this ambitious target, the measures that have been used up to now for internal engines, such as mechanical and electronic control units, common rail systems, electric charging and exhaust gas recirculation, will no longer be adequate. “The new directives will make exhaust after-treatment systems for equipment over 50 HP absolutely imperative,” says Gunnar Stein, ‘Off Road’ Product Line Manager for AVL GmbH in Graz. AVL is considered one of the world’s leading companies in the development of drive systems. It advises and supports many famous engine and machinery manufacturers, who will convene at bauma, the leading construction machinery fair.

Variant 1: Exhaust gas recirculation and particulate filters
According to the experts there are two main technological routes to achieving the necessary reduction in emissions. One way is to reduce the level of nitrogen oxide by recirculating the exhaust gas in the engine. The resultant increased particulate emissions must then be collected in a particulate filter. One disadvantage of this system is that the exhaust gas must be cooled before recirculation. “We can expect up to 25 percent greater heat input into the cooling system in comparison to Stage III A engines,” explains Gunnar Stein. “This will require larger cooling surfaces and possibly higher fan performance. The former means the engine and vehicle manufacturers will face a problem with space in the engine compartment, and the latter means an additional energy user will be required.”

Variant 2: Combating nitrogen oxides with SCR systems
In the second technological route the engine is adjusted to low particulate levels. However this means accepting increased levels of nitrogen oxide in the exhaust gas flow. These can then be dealt with using systems involving urea injection (SCR). “Low fuel consumption certainly makes this system attractive, but an additional operating material has to be used with the urea, which further reduces the cost benefits,” explains Stein. From today’s perspective, both systems must be combined in order to comply with the demands of Stage IV, which requires a further reduction in nitrogen oxide levels by up to 88 percent from 2014.

The ‘side effects’ make it complicated
“The Stage III B and IV exhaust gas regulations are a challenge for both engine manufacturers and machine manufacturers, because in these exhaust gas stages not just the engine, but also different components in the exhaust after-treatment and its installation conditions play a major part in complying with the levels,” emphasises Frank Diedrich, exhaust gas expert for the VDMA (Verband Deutscher Maschinen- und Anlagenbau), Germany’s engineering federation, and the CECE (Committee for European Construction Equipment). ”The additional exhaust gas after-treatment has ‘side effects’, which will strongly influence the development of mobile machines in the future – for example increased noise emission, rising temperatures and the requirement for extra installation space. In addition there will be increased technological complexity in keeping fuel consumption low, and adapting the exhaust gas systems in sometimes less than ideal deployment conditions in the construction industry."

Price increases seem inevitable
Whichever route the manufacturers choose to take, one thing seems certain: prices will rise. According to Gunnar Stein, we can assume that carrying out the measures referred to will see costs for Stage IV engine and exhaust gas treatment almost doubling. “The bottom line is that manufacturers must weigh up the pros and cons of the various technical solutions, so that they come up with not necessarily the cheapest solution, but rather the concept that will be most cost-effective over the whole life-cycle,” sums up Stein.

Bringing together industry expertise
The new emission directives will be a central theme for both the international exhibitors and the trade public at bauma, the world’s leading trade fair. From 19 to 25 April 2010 at the New Munich Trade Fair Centre, there will be the opportunity to get an overview of the innovations and solutions put forward on this topic by engine developers, component manufacturers and construction machinery producers.

A market place for innovations
The International Trade Fair for Construction Machinery, Building Material Machines, Mining Machines, Construction Vehicles and Construction Equipment has always been considered the definitive innovations’ marketplace for the industry worldwide. According to a representative survey at bauma 2007, 91 percent of all exhibitors who presented innovative products said that they achieved their objective with a very good or good outcome. Also, 92 percent of all visitors assessed the presentation of innovations at the leading trade fair as very good or good.

bauma in brief
A record 555,000 square metres and more of indoor and outdoor exhibition space (gross) at the New Munich Trade Fair Centre are being dedicated to a display of the latest products from the international construction, building-materials and mining machinery sectors between 19 and 25 April 2010. More than 3,000 exhibitors are expected to make use of this event, the world´s biggest trade fair for the sector, as a platform for innovations and marketing. For further information on bauma, go to: www.bauma.de

Source : baumpub

Volvo Trucks Safety Award continues in 2010

2010-01-28T17:44:00.000-08:00

Volvo Trucks North America continues its high-profile recognition of the safest fleets in North America through the 2010 Volvo Trucks Safety Awards. Two fleets with the safest driving records and top safety programs will each receive $25,000 prizes to be used on their safety activities.

This is the second year Volvo Trucks will highlight the safety efforts of individual fleets. Michelin joins Volvo Trucks in 2010 as a sponsor of the Volvo Trucks Safety Award, demonstrating the importance highway safety has for the trucking industry.

“Year in and year out, safety remains a top issue for Volvo and the entire industry,” said Scott Kress, senior vice president – sales & marketing. “The Volvo Trucks Safety Award is a way to show that safety pays, even during the difficult times trucking has been through recently.”

“Volvo Trucks and Michelin know how important it is to encourage all fleets to examine their safety programs to see where they can make improvements and to celebrate those companies which set a standard others can aspire to,” Kress said. “We want to promote the need for safe truck operations by all fleets.”

The Volvo Trucks Safety Award is open to all U.S. and Canadian fleets operating at least five Class 8 units. Fleets must have at least one Volvo tractor in operation to be eligible for the award. Entrants will be ranked by their accident frequency rates. Participating fleets will also be judged on their accident prevention activities.

The deadline for entry is May 30, 2010. The winners of the award will be announced in Fall 2010. The two grand prizes will be awarded to the fleets with the best records in two divisions based on annual vehicle miles traveled: less than 20 million miles and more than 20 million miles. Complete rules and entry forms are at www.volvotruckssafetyaward.com.

The winners of the inaugural safety award in 2009 were Bison Transport of Winnipeg, Manitoba, and Food City, Abingdon, Virginia. Officials from the two companies detail their approach to fleet safety in a video available at this link: http://www.volvo.com/trucks/na/en-us/about_us/vtna_safety_award/vtna_safety_award.htm.

Volvo Trucks North America

Source : baumpub

Caterpillar 573 Wheel Feller Buncher

2010-01-28T17:31:00.000-08:00

Cat Feller Bunchers are durable, reliable and agile. With up to 90º articulation and liquid-smooth operation, Cat tractors maneuver easily up and down hills and through dense timber. These rugged, reliable machines are designed for easy maintenance and low operating costs.

Specifications

Units: US | Metric

Gross Power
225 hp
168 kW

Rated Power
225 hp
168 kW

Net Power
225.29 hp
168 kW

Source : cat

Caterpillar 563 Wheel Feller Buncher

2010-01-28T17:29:00.000-08:00

Cat Feller Bunchers are durable, reliable and agile. With up to 90º articulation and liquid-smooth operation, Cat tractors maneuver easily up and down hills and through dense timber. These rugged, reliable machines are designed for easy maintenance and low operating costs.

Specifications

Units: US | Metric

Gross Power
197 hp
147 kW

Rated Power
1800 hp
1800 kW

Net Power
197.13 hp

Source : cat

Caterpillar 553 Wheel Feller Buncher

2010-01-28T17:24:00.000-08:00

Cat Feller Bunchers are durable, reliable and agile. With up to 90º articulation and liquid-smooth operation, Cat tractors maneuver easily up and down hills and through dense timber. These rugged, reliable machines are designed for easy maintenance and low operating costs.

Specifications

Units: US | Metric

Gross Power
173 hp
129 kW

Net Power
190.43 hp
142 kW

Rated Power
175 hp
131 kW

Source : cat

Caterpillar 552 Track Feller Buncher

2010-01-19T16:56:00.000-08:00

Caterpillar 551 Track Feller Buncher

2010-01-19T16:53:00.000-08:00

Caterpillar 541 Track Feller Buncher

2010-01-19T16:51:00.000-08:00

A robust, reliable undercarriage utilizes proven components, customized for the most rugged forestry conditions. The unique boom design provides industry leading lift capacity throughout full reach range, a benefit in large timber. Three models are available with just the right horsepower, track size and hydraulic configurations to fit your application needs.

Specifications

Units: US | Metric

Gross Power
227.4 hp
305 kW

Engine Model
Cat® C9 ACERT™

Rated Power
210.3 hp
282 kW

Source : cat

Caterpillar PS-360C Pneumatic Tire Compactor

2010-01-19T16:47:00.000-08:00

The new PS-360C Pneumatic Compactor establishes new standards for productivity and reliability in the compaction industry. A durable Cat engine, large ballast tank and the world's largest and most dedicated dealer support system ensure the PS-360C Pneumatic Compactor will provide maximum utilization. The PS-360C will achieve outstanding compaction results regardless of the application with its proven suspension design and flexible weight adjustment.

Specifications

Units: US | Metric

Engine Model
Cat® 3054C ATAAC

Gross Power
130 hp
98 kW

Net Power - EEC 80/1269
125 hp
93 kW

Source : cat

Caterpillar PS-150C Pneumatic Compactor

2010-01-19T16:43:00.000-08:00

The PS-150C Compactor offers high compaction performance, speed and gradeability to maximize productivity while providing exceptional reliability and durability.

Based upon the industry-proven reputation of the Caterpillar PS-150B and the PS-200B Asphalt Compactors, the new PS-150C establishes new standards for productivity and reliability in the asphalt compaction industry.

Durable Cat powertrain, field-proven hydraulic systems and the world's largest and most dedicated dealer support system ensure the PS-150C Asphalt Compactors will provide maximum utilization.

Specifications

Units: US | Metric

Engine Model
CAT 3054 C

Gross Power
100 hp
75 kW

Net Power - EEC 80/1269
96 hp

Source : cat

Caterpillar CB64 Vibratory Asphalt Compactors

2010-01-19T16:41:00.000-08:00

The CB64 Asphalt Compactor offers compaction performance, application versatility and operator comfort to maximize productivity while providing exceptional product quality. Based upon the industry-proven reputation of the Caterpillar Asphalt Compactors, the CB64 establishes innovative new standards for productivity and reliability in the asphalt compaction industry. Durable Cat powertrain, field-proven hydraulic systems and vibratory systems, and the world's largest and most dedicated dealer support system ensures the CB64 Asphalt Compactor will provide maximum productivity. The operator's station provides a comfortable and user friendly environment that promotes productive operation. Simplified service access and extended service intervals minimize maintenance time and increase machine production.

Specifications

Units: US | Metric

Engine Model
Cat® C4.4 with ACERT Technology

Gross Power
137 hp
102 kW

Net Power - ISO 9249
130 hp
97 kW

Source : cat

Caterpillar CB54 XW Vibratory Asphalt Compactors

2010-01-19T16:38:00.000-08:00

The CB54 XW Asphalt Compactor offers compaction performance, application versatility and operator comfort to maximize productivity while providing exceptional product quality. Based upon the industry-proven reputation of the Caterpillar Asphalt Compactors, the CB54 XW establishes innovative new standards for productivity and reliability in the asphalt compaction industry. Durable Cat powertrain, field-proven hydraulic systems and vibratory systems, and the world's largest and most dedicated dealer support system ensures the CB54 XW Asphalt Compactor will provide maximum productivity. The operator's station provides a comfortable and user friendly environment that promotes productive operation. Simplified service access and extended service intervals minimize maintenance time and increase machine production.

Specifications

Units: US | Metric

Engine Model
Cat® C4.4 with ACERT Technology

Gross Power
137 hp
102 kW

Net Power - ISO 9249
130 hp
97 kW

Source : cat

Caterpillar CB564D Vibratory Asphalt Compactors

2010-01-19T16:36:00.000-08:00

The CB564D Asphalt Compactor offers compaction performance, application versatility and operator comfort to maximize productivity while providing exceptional product quality. Based upon the industry-proven reputation of the Caterpillar Asphalt Compactors, the CB564D estabilishes new innovative standards for productivity and reliability in the asphalt compaction industry. Durable Cat powertrain, field-proven hydraulic systems and vibratory systems, and the world's largest and most dedicated dealer support system ensures the CB564D Asphalt Compactor will provide maximum productivity. The operator's station provides a comfortable and user friendly environment that promotes productive operation. Simplified service access and extended service intervals minimize maintenance time and increase machine production.

Specifications

Units: US | Metric

Engine Model
Cat® 3054C

Gross Power
130 hp
97 kW

Net Power - EEC 80/1260
125 hp
93 kW

Source : cat